Cleaning The Realscan 7875 - NCR RealScan 7875-7000 Installation Manual

NCR RealScan 7875-7000/8000 Installation Guide
Keeping the scan windows clean helps keep the read rate exceptionally high. During normal
operation the scan windows get dirty, and if you permit the dirt to accumulate, performance
degrades to the point where the scanner cannot read bar codes. The Please Clean Window
indicator flashes when the scan windows need cleaning. Use a soft cloth moistened with a
common, non-abrasive, liquid window cleaner to clean the scan windows. Be sure to spray the
cleaner onto the cloth, not directly onto the RealScan 7875
Note: Scale problems can occur from debris collecting under the Top Plate. Be sure to keep the
plastic Subplate clean to prevent interference with the Top Plate when weighing items. Debris
can also collect behind and under the Produce Guard. Keep this area clean, which requires
removing the Produce Guard.
34 of 56
Top Plate

Cleaning the RealScan 7875

Wiping Action
06/03
Plastic Subplate
AIP-00342 Release B
16049