Manual Deactivation - NCR RealScan 7875-7000 Installation Manual

Manual Deactivation

If for some reason the security tag is not deactivated in the normal manner, it can be deactivated
manually. This normally occurs when too much time elapses after the RealScan 7875 reads the
barcode. Use the following procedure to deactivate the security tag.
1. Press the Volume button on the RealScan 7875. The RealScan 7875 laser light turns off,
2. Pass the security tag into the deactivation zone. The Security Tag Detected Tone sounds
AIP-00342 Release B
disabling the scanner.
(similar to a Geiger counter) and the tag is deactivated. The RealScan 7875 laser light turns
on, enabling the scanner.
06/03
NCR RealScan 7875-7000/8000 Installation Guide
33 of 56