Avaya c360 Installation And Configuration Manual page 36

Avaya C360 Front and Rear Panels
Table 3: C360 Function LED Descriptions 3 of 3
LED
Name
PoE*
*C360-PWR only
Tip:
All LEDs light during a reset.
Tip:
Table 4: C360 Right and Left Select buttons
On order to...
Select the function
LED (see
Reset the switch
Reset the stack
36 Installation and Configuration Guide Avaya C360 Multilayer Stackable Switches, version 4.5
Description LED Status
Power over OFF - PoE disabled for this port
Ethernet.
ON - PoE is enabled and power is being supplied
to an end-station
Blinking:
Press...
Left or Right button
Table 3)
Both Right and Left buttons together for approximately
one second. All LEDs on the switch remain lit until the
procedure is complete.
Both Right and Left buttons together for five seconds. All
LEDs on the stack remain lit until the procedure is
complete.
PoE enabled, but no powered device is
●
detected, or
Power supply error, or
●
Not enough power
●
3 of 3