Budgeting Power - Avaya c360 Installation And Configuration Manual

Budgeting Power

Note:
One APC 800W PSU provides enough power for a stack of ten C363T and/or
Note:
C364T switches.
When deciding how many 800W PSUs to install in the APC external DC power shelf, you need
to take into account the configuration of the powerinline external power parameter in the
C360-PWR switch (set using the set powerinline external power CLI command).
Refer to Table 10
If you set the powerinline external power parameter to other values, you need to recalculate the
number of switches supported accordingly.
and Table 11 for guidelines:
Table 10: Budgeting Power - C363T-PWR
No. of APC No. of C363T-PWR switches
PSUs supported
Power requirement: 350W
1 2
2 4
3 6
Table 11: Budgeting Power - C364T-PWR
No. of APC No. of C364T-PWR switches
PSUs supported
Power requirement = 600W
1 1
2 2
3 4
Connecting a BUPS
Issue 2 July 2005 59