Lag Implementation In The C360 - Avaya c360 Installation And Configuration Manual

LAG Implementation in the C360

This section describes the implementation of the LAG feature in the C360 product family.
With the C363T and C363T-PWR, you can aggregate the two GBIC ports to form a LAG,
●
you can aggregate the bandwidths of 3 groups of 10/100BASE-T ports in a LAG, for a
maximum of four LAGs per switch.
With the C364T and C364T-PWR, you can aggregate the two GBIC ports to form a LAG,
●
you can aggregate the bandwidths of six 10/100BASE-T ports in a LAG, for a maximum of
seven LAGs per switch.
Tip:
You cannot combine 10/100BASE-T and 1000BASE-X ports in a LAG. You can
Tip:
only aggregate the bandwidths of 10/100BASE-T ports numbered 1-24 and 25-48
in a LAG within their respective ports groups, 1-24 or 25-48.
The relationship between the C360 Port Numbers and the LAG logical Port Number that will be
assigned to each LAG is shown in Table 31.
Table 33: LAG Logical Port Numbers
LAG Definition
Order
1
2
3
4
5
6
7
LAG (Link Aggregate Group)
LAG Logical Port
Number
101
102
103
104
105
106
107
Issue 2 July 2005 139