Port Redundancy Cli Commands - Avaya c360 Installation And Configuration Manual

Avaya C360 Layer 2 Features
Tip:
Once a port has been designated in a redundancy scheme, either as a primary or
Tip:
a secondary port, it can not be designated in any other redundancy scheme.
Tip:
Intermodule Port Redundancy does not interwork with the Spanning Tree
Tip:
Algorithm.

Port Redundancy CLI Commands

The following table contains a list of the CLI commands for the Redundancy feature. The rules
of syntax and output examples are all set out in detail in the Reference Guide for the Avaya
C360 Converged Stackable Switch, 10-300506.
142 Installation and Configuration Guide Avaya C360 Multilayer Stackable Switches, version 4.5
In order to...
Define or remove port
redundancy schemes
Enable the defined port
redundancy schemes
Disable the defined port
redundancy schemes
Define the timers that control the
port redundancy operation
Display information on port
redundancy schemes.
Define the switch's unique
intermodule redundancy
scheme
Clear the intermodule
redundancy
display the intermodule
redundancy entry defined for the
switch
Use the following command...
set port redundancy
set port redundancy enable
set port redundancy disable
set port redundancy-interval
show port redundancy
set intermodule port redundancy
set intermodule port redundancy
off
show intermodule port
redundancy