System Parameter Configuration; Identifying The System - Avaya c360 Installation And Configuration Manual

Switch Configuration
Table 23: Basic Switch Configuration CLI Commands 2 of 2

System Parameter Configuration

Identifying the system

In order to make a C360 switch easier to identify, you can define a name for the switch, contact
information for the switch technician, and the location of the switch in the organization. The
rules of syntax and output examples are all set out in detail in the Reference Guide for the
Avaya C360 Converged Stackable Switch, 10-300506.
Table 24: System Identification CLI Commands
98 Installation and Configuration Guide Avaya C360 Multilayer Stackable Switches, version 4.5
In order to...
Return the prompt to its default
value
Clear the current terminal
display
Set the number of minutes
before an inactive CLI session
automatically logs out
Display the number of minutes
before an inactive CLI session
automatically times out
Access Layer 3 configuration if
not logged in as supervisor (see
Entering the Supervisor
Level on page 63)
In order to...
Configure the system name.
Configure the system contact
person
Configure the system location
Use the following command...
no hostname
clear screen
set logout
show logout
configure
Use the following command...
set system name
set system contact
set system location
2 of 2