Static Color; Master/Slave; Dimmer Curves; Control Panel Lock - Chauvet Colorado Zoom WW tour User Manual

Static Color

Master/Slave

Dimmer Curves

Control Panel
Lock
COLORado™ Zoom Tour WW User Manual Rev. 05
The Static Color mode allows for permanent Cool White color mixing without a DMX
controller.
1. Go to the STAT main level.
2. Select the desired color and zoom setting (C, W, or Z).
3. Select the desired color or zoom value (0~255).
4. Repeat for the other colors.
The Master/Slave mode allows a group of COLORado™ Zoom Tour WW's (the slave
products) to simultaneously duplicate the output of another COLORado™ Zoom Tour
WW (the master product) without a DMX controller.
1. Set each of the slave products:
a. Go to the RUN main level.
b. Select SLAVE.
2. Set the master product:
a. Set the running mode to DMX as explained in
b. Select a static mix of colors as explained in
 The master product is the one that runs a program in Static Color mode.
 Do not connect a DMX controller to the products configured for Master/Slave
operation.
 The master product should be the first product in the daisy string.
This setting determines how fast the output of the COLORado™ Zoom Tour WW changes
when you modify the values of the Cool White, Warm White, and Dimmer faders. This
setting provides four different options to simulate the dimming curve of an incandescent
lighting product.
1. Go to the SET main level.
2. Select DIM.
3. Select a dimmer curve (OFF, DIM1, DIM2, DIM3, or DIM4).
The output is proportional (linear) to the Dimmer, Cool White, and Warm
OFF:
White channel values.
The output follows the Dimmer, Cool White and Warm White channel values
DIM1~4:
based on the corresponding dimmer curve, DIM1 being the fastest and
DIM4 the slowest.
This setting enables you to activate or disable the control panel lock, which keeps
non-authorized personnel from changing the product's settings.
1. Go to the KEY main level.
2. Select OFF or ON.
When the control panel lock is active, the product will prompt you to enter the
password after 30 seconds of control panel inactivity or after turning on the product.
After being prompted to enter the password:
Press <UP>, <DOWN>, <UP>, <DOWN>, and <ENTER>.
DMX Control.
Static Color.
Operation
-11-