Table of Contents
Advertisement
Descaling the steam generator
step
info/button
7
8
9
10
11
instructions
You will be asked to fill up with descaling fluid.
Open the cooking cabinet door.
Remove left hanging rack and air baffle.
Guide hose into steam inlet opening as far as
the mark shown.
Note:
The allocation of marks to unit size is described
in the instructions for the descaler pump.
Warning!
Aggressive chemical fluid – risk of chemical
burns.
It is essential that you use:
protective clothing, safety goggles, gloves,
facemask and the unit manufacturer's descaler
pump.
Insert hanging rack and fix hose with wire
hooks.
71 / 85
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the CombiMaster Plus 61 and is the answer not in the manual?
Questions and answers
I need trouble shooting manually
To manually troubleshoot the Rational CombiMaster Plus 61, follow these steps:
1. Cooking Cabinet Light Not Working
- Cause: Halogen lamp is defective.
- Solution: Replace the lamp (refer to the “Maintenance” section of the manual).
2. Low Water Warning ("OPEn H2O" on Display)
- Cause: Water tap is closed or the water intake filter is clogged.
- Solution:
- Open the water tap.
- Check and clean the water intake filter:
- Close the water tap.
- Unscrew the water intake on the unit.
- Remove and clean the filter.
- Reinsert the filter, reconnect the intake, and check for leaks.
3. Water Running Out from the Bottom of the Unit
- Cause: The unit is not level or the drain is blocked.
- Solution:
- Level the unit using a spirit level (refer to the Installation Manual).
- Remove and clean the outlet (HT pipe) at the back of the unit.
- If blockages recur, ensure the outlet pipe is installed correctly according to the installation instructions.
4. Unit Not Functioning
- Cause: External main power issue or other faults.
- Solution:
- Check the external power supply and ensure the unit is connected properly.
- If the issue persists, further troubleshooting or service may be required.
For additional troubleshooting, refer to the manual or contact professional service if necessary.
This answer is automatically generated