Supplement; Technical Data - Vega VEGAPULS 67 Operating Instructions Manual

11 Supplement

11.1 Technical data

General data
316L corresponds to 1.4404 or 1.4435
Materials, wetted parts
Ʋ Adapter flange
Ʋ Seal, adapter flange
Ʋ Antenna
Ʋ Focussing lense
Materials, non-wetted parts
Ʋ Compression flange
Ʋ Mounting strap
Ʋ Fixing screws, mounting strap
Ʋ Fixing screws, adapter flange
Ʋ Plastic housing
Ʋ Aluminium die-casting housing
Ʋ Stainless steel housing
Ʋ Cable gland
Ʋ Sealing, cable gland
Ʋ Blind plug, cable gland
Ʋ Seal between housing and housing lid Silicone SI 850 R, NBR silicone-free
Ʋ Inspection window in housing cover
(optional)
Ʋ Ground terminal
Process fittings
Ʋ Flanges
Weight depending on process fitting and
housing material
Max. torques, version plastic horn antenna
Ʋ Mounting screws, mounting strap on
sensor housing
Ʋ Flange screws, compression flange
DN 80
Ʋ Flange screws, adapter flange DN 100 7 Nm (5.163 lbf ft)
Max. torque for NPT cable glands and Conduit tubes
Ʋ Plastic housing
Ʋ Aluminium/Stainless steel housing
VEGAPULS 67 • 4 ... 20 mA/HART - four-wire
PP-GF30 black
FKM (COG VI500), EPDM (COG AP310)
PBT-GF 30
PP
PP-GF30 black
316L
316L
304
plastic PBT (Polyester)
Aluminium die-casting AlSi10Mg, powder-coated - basis:
Polyester
316L
PA, stainless steel, brass
NBR
PA
Polycarbonate
316L
DIN from DN 80, ASME from 3", JIS from DN 100 10K
0.7 ... 3.4 kg (1.543 ... 7.496 lbs)
4 Nm (2.950 lbf ft)
5 Nm (3.689 lbf ft)
10 Nm (7.376 lbf ft)
50 Nm (36.88 lbf ft)
11 Supplement
69