Vega VEGAPULS 67 Operating Instructions Manual page 70

11 Supplement
Torques
Max. torques
Ʋ Mounting screws, mounting strap on
sensor housing
Ʋ Flange screws, compression flange
DN 80
Ʋ Flange screws, adapter flange DN 100 7 Nm (5.163 lbf ft)
Max. torques for NPT cable glands and Conduit tubes
Ʋ Plastic housing
Ʋ Aluminium/Stainless steel housing
Input variable
Measured variable
Fig. 46: Data of the input variable
1 Reference plane
2 Measured variable, max. measuring range
3 Antenna length
4 Utilisable measuring range
Max. measuring range
Recommended measuring range
70
4 Nm (2.950 lbf ft)
5 Nm (3.689 lbf ft)
10 Nm (7.376 lbf ft)
50 Nm (36.88 lbf ft)
The measured quantity is the distance between the
end of the sensor antenna and the product surface. The
reference plane for the measurement is the lower side of
the flange.
3
4
15 m (49.21 ft)
up to 15 m (49.21 ft)
VEGAPULS 67 • 4 ... 20 mA/HART - four-wire
1
2