Maintenance Page - JVC VN-X35U Instructions Manual

VN-V25U_26U_EN.book Page 74 Wednesday, September 3, 2008 8:03 PM
Setting Using Internet Explorer
Setting (continued)

Maintenance Page

This page is for maintenance purposes.
This page can be used during access using AadminB.
● Click [Advanced Settings] to display setting menu.
● Click [Maintenance].
Click
A
Restart Restarts the camera. (It takes about one minute for the camera to restart.)
B
All Settings Restores all settings to their default values and reboots the unit. (It takes
about one minute for the camera to initialize and reboot.)
AInitializeB
Passwords will also be initialized. The built-in clock of VN-X35U will not be
affected. JPEG/MPEG4 transmission and all others services that are
running will be discontinued.
C
Update Upgrades the firmware version of VN-X35U and reboots the unit.
The settings of VN-X35U will be saved. Copy the new firmware file to the
computer on which Internet Explorer is used, and specify this file using the
[Browse...] button. Press the [Update] button to start the update. JPEG/
MPEG4 transmission and all others services that are running will be
discontinued. The update process may take several minutes.
A message will be displayed on the Internet Explorer when update is
successfully completed.
74
Note:
● Do not turn off the power when update is in progress or during reboot
after update is complete. Turning off the power of the camera may cause
it to malfunction.
A
B
C