Instructions (SD Card Function Settings) VN-H137BU VN-H237U VN-H237BU VN-H237VPU VN-H57U VN-H257U VN-H257VPBU VN-H157WPU Contents Precautions for using SD cards ..................2 SD Cards........................3 Inserting and removing an SD card ................3 SD cards usable with this camera ................4 Built-in Viewer Screen Configuration ................
This manual details the SD card recording and playback functions. Windows and Internet Explorer are registered trademarks of Microsoft Corporation in the United States and other countries. Regarding the notation of product names In the main text, product names are written without suffixes like B or C. Precautions for using SD cards Do not insert anything into the camera.
SD Cards This unit can record the images you shoot in an SD card (sold separately) inserted in the card slot. Inserting and removing an SD card If you insert the SD card in the incorrect direction, the camera or the card may be damaged. Always check that the card has been inserted in the correct direction as shown in the illustration of the SD card slot.
When using VN-H157WPU SD card cover 1・3 SD card (label side) Sunshade rotation setscrew Follow the steps below to insert an SD card. 1. Loosen the screw at the bottom of the camera, and rotate the sunshade enough so that the SD card can be inserted.
Built-in Viewer Screen Configuration This camera includes a Built-in Viewer. Start the Built-in Viewer by entering the IP address of the camera in the address bar of Internet Explorer. You can access the SD card recording settings screen and SD card playback screen display from the Built-in Viewer.
Basic Setting2 Page This page sets fundamental camera and encoding parameters. This page is displayed by pressing the [Details] button in the Built-in Viewer. Select the ④ [Set in "SD Card Record" Page] and click [OK] to move to the SD card recording settings page Page 8).
Item Description Camera ID ① Refer to the "Instructions (Setting)" of the attached CD-ROM. Scenefile ② Lens Type Refer to the [Lens Type] description. ( "Instructions (Setting)" ─ "Internet Explorer ③ Setting" ─ "Advanced Settings" ─ [Maintenance] Page) (VN-H37U/H57U only) Encode Select the frame size for each screen of JPEG and H.264 from the following ④...
SD Card Record Page This page sets SD card recording settings. This is displayed when you press the [Details] button in the Built-in Viewer and click [SD Card Record], or when you click [Set in "SD Card Record" Page] in the [Basic Setting2] page. This page can be used during access using "admin"...
Item Description SD Card Sets whether or not to use the SD card. ① [Set values ： Use, Disable] Check "Disable" and press the [OK] button to automatically set recording to OFF and stop recording. Check "Use" and press the [OK] button to enable all the SD card recording-related check boxes.
Item Description Format The SD card format status display and the format execute button are located ② here. The format type is unique to this camera. [Status ： Unformatted, Formatting, Formatted, ---] "---" is displayed when the SD card status display is not "Use". "Unformatted"...
Item Description Record Status Starts and stops recording to an SD card. ③ [Set values : ON, OFF] [Status : No Recording, Recording] This is only enabled when the SD card status is "Use" and the format status is "Format complete". When recording, the status changes to [Recording].
Item Description Alarm SD card recording is performed when conditions set for the alarm setting items ④ are met. The alarm event recording interval for when an alarm is triggered is from 60 seconds before the trigger (pre-trigger) to 60 seconds after the trigger (post-trigger), for a total of 120 seconds.
Item Description Interval This is available when both [Trigger1] and [Trigger2] are set. ⑤ (VN-H57U/H2 Specify the maximum interval between each trigger for [Trigger1] and [Trigger2]. 57U/H257VP An alarm recording will be performed if [Trigger2] occurs within the maximum U/H157WPU time interval after [Trigger1] occurs.
Item Description Encode Setting Sets the image quality for video recorded to an SD card, and the image quality for ⑥ video displayed in the Built-in Viewer. If recording for ③ [Record Status] is set to "ON", these radio buttons become unchangeable.
SD Card Playback Screen This can be used when accessed as an "admin" or as an "operator". This is displayed when you click [SD Card] button on the Built-in Viewer screen. You can play video files stored in the SD card. ①...
Item Description Event List Displays a list of search results for recorded videos filtered by time and event ④ Playback menu trigger. Select the item from the displayed list that you want to play and begin playback. From/To Displayed videos will be limited to those recorded between the 2 times that you specify.
Item Description Export menu Video from the specified [From] date/time to the [To] date/time is saved to your computer. ⑤ The save location can be specified in [Viewer Setup] - [Other] - [Video Export Folder] via the Built-in Viewer screen. Note: Depending on the camera's internal recordings, a saved video may be split up as multiple files.
Video control menu ① ② ③ ④ ⑤ ⑥ ⑧ ⑦ ⑨ ⑫ ⑩ ⑪ ⑮ ⑬ ⑭ Item Description Item Description Returns to the previous frame, Advances to the most recent ① ⑨ and then pauses playback. video, and then pauses playback. Starts reverse playback.
[STATUS] indicator indicator VN-H37U/H57U/H137U VN-H237U/H257U VN-H157WPU VN-H257VPU When the camera [STATUS] indicator lamp flashes orange, it may not be possible to record to the SD card. Check the SD card condition and the camera settings. [STATUS] indicator The inserted SD card has not been formatted. Format the card from the [SD Card Record] page.
In some cases, the video output file may not be saved to the computer even when using [Export] ( Page 17 ⑤). With Windows 7 or Windows Vista, run Internet Explorer as Administrator. To do so, perform the following: 1. Right click the Internet Explorer icon. 2. Select [Run as Administrator]. © 2013 JVC KENWOOD Corporation LST1392-001B...