Protocol Page - JVC VN-X35U Instructions Manual

VN-V25U_26U_EN.book Page 67 Wednesday, September 3, 2008 8:03 PM

Protocol Page

This page is for changing the HTTP server port number.
This page can be used during access using AadminB.
● Click [Advanced Settings] to display setting menu.
● Click [Protocol].
● Press the [OK] button to enable the new settings.
● After changing, you will need to re-establish the connection if you are using the Internet Explorer.
Click
A
HTTP Server You can change the port number for the built-in web server of VN-X35U.
(1 to 65535: The default port number setting is 80.)
Port
The JPEG and MPEG4 HTTP port number for the web server will also be
changed. During access to VN-X35U from the Internet Explorer, enter the
following in the Internet Explorer when the camera is in its default settings.
http://192.168.0.2
If the port number is changed to 8080, for example, enter the Internet
Explorer as follows.
http://192.168.0.2:8080
B
VISIP Protocol For setting VSIP to On/Off.
Set to AOnB if you want to use this unit from Verint's Nextiva products.
C
VISIP Server For changing the built-in VSIP number of VN-X35U.
(1 to 65535: Default value is 5510)
Port
D
AMX Device For setting AMX Device Discovery Protocol to On or Off.
Set to AOnB when you are using VN-X35U on AMX's systems.
Discovery
[Set values : On, Off]
Protocol
Memo:
● If the built-in viewer is used for playback, change the HTTP port number in the setting screen of the
built-in viewer to the same value.
A
B
C
D
67