Replacing A Memory Module - Lenovo 3000 K100 Hardware Maintenance Manual

Replacng a memory module
14. Install the heat sink and fan assembly on the system board.
15. Connect the heat sink and fan assembly cable to the system board.
See the system board illustration for your machine type at
parts on the system board"
16. See the "Completing the FRU
To replace a memory module:
1. Remove the computer cover. See
Note: For this procedure, it helps to lay the computer on its side.
2. Locate the memory module connectors. See
system board" .
3. Remove the memory module being replaced by opening the retaining
clips as shown.
4. Position the new memory module over the memory connector. Make
Chapter 7. Replacing FRUs (tower computers)
.
replacement".
"Removing the cover"
"Identifying parts on the
"Identifying
.