Step 3.
Open the drive bay as shown.
Step 4.
Open the metal tab that secure the graphic card to the chassis.
Step 5.
Push the locking pin on the motherboard to release the graphic card.
Step 6.
Lift the graphic card straight up to remove it.
Step 7.
To install the new graphics card:
a.
Attach the new graphics card to the same adapter connector.
b.
Close the latches and the drive bay.
Step 8.
Reattach the front bezel and computer cover.
Replacing a memory module
Note: For this procedure, it helps to lay the computer flat.
To replace a memory module:
Step 1.
Remove the computer cover. Refer to "Removing the computer cover".
Step 2.
Remove the front bezel. Refer to "Removing the front bezel".
32
ideacentre 510S Series Hardware Maintenance Manual
a
b
c