Lenovo 3000 J 7387 Hardware Maintenance Manual
  1. Manuals
  2. Brands
  3. Lenovo Manuals
  4. Desktop
  5. 3000 J 7387
  6. Hardware maintenance manual
Lenovo 3000 J 7387 Hardware Maintenance Manual

Lenovo 3000 J 7387 Hardware Maintenance Manual

Hide thumbs Also See for 3000 J 7387:
Table of Contents

Advertisement

Quick Links

Download this manual See also: Hardware Maintenance Manual
Hardware Maintenance Manual
Lenovo 3000 J Series
Types 7387, 7388, 7389, 7390, 7391, 7392,
7393, 7394, 7395, 7396, 7397, 7398

Advertisement

Table of Contents
loading

Related Manuals for Lenovo 3000 J 7387

Summary of Contents for Lenovo 3000 J 7387

  • Page 1 Hardware Maintenance Manual Lenovo 3000 J Series Types 7387, 7388, 7389, 7390, 7391, 7392, 7393, 7394, 7395, 7396, 7397, 7398...
  • Page 3 Lenovo 3000 J Series...
  • Page 4 RESTRICTED RIGHTS. Use, duplication or disclosure by the Government is subject to the GSA ADP Schedule contract with Lenovo Group Limited, if any, or the standard terms of this commercial license, or if the agency is unable to accept this Program under these terms, then we provide this Program under the provisions set forth in Commercial Computer Software–Restricted Rights at FAR 52.227-19, when applicable, or under Rights in...

  • Page 5: Table Of Contents

    Selecting a temporary startup device . . 53 Replacing the system board (Types 7396, 7397, and Changing the startup device sequence . 53 7398) . . 125 Exiting from the Setup Utility program . . 53 © Lenovo 2006. Portions © IBM Corp. 2005, 2006.
  • Page 6 Appendix. Notices ..195 Machine Type 7394 . 171 Television output notice . . 196 Machine Type 7395 . 175 Trademarks . . 196 Machine Type 7396 . 178 Lenovo 3000 J Series...

  • Page 7: Chapter 1. About This Manual

    It is intended only for trained servicers who are familiar with Lenovo computer products. Before servicing a Lenovo product, be sure to read the Safety Information. See Chapter 2, “Safety information,” on page 3. The Symptom-to-FRU Index and Additional Service Information chapters are not specific to any machine type and are applicable to all Lenovo computers.

  • Page 8: Important Information About Replacing Rohs Compliant Frus

    Lenovo plans to transition to RoHS compliance well before the implementation date and expects its suppliers to be ready to support Lenovo’s requirements and schedule. Products sold in 2005, will contain some RoHS compliant FRUs. The following statement pertains to these products and any product Lenovo produces containing RoHS compliant parts.

  • Page 9: Chapter 2. Safety Information

    After service, reinstall all safety shields, guards, labels, and ground wires. Replace any safety device that is worn or defective. v Reinstall all covers correctly before returning the machine to the customer. Electrical safety © Lenovo 2006. Portions © IBM Corp. 2005, 2006.
  • Page 10 Regularly inspect and maintain your electrical hand tools for safe operational condition. v Do not use worn or broken tools and testers. v Never assume that power has been disconnected from a circuit. First, check that it has been powered-off. Lenovo 3000 J Series...

  • Page 11: Safety Inspection Guide

    v Always look carefully for possible hazards in your work area. Examples of these hazards are moist floors, nongrounded power extension cables, power surges, and missing safety grounds. v Do not touch live electrical circuits with the reflective surface of a plastic dental mirror.

  • Page 12: Handling Electrostatic Discharge-Sensitive Devices

    – Use the round ground-prong of the ac plug on ac-operated computers. Grounding requirements Electrical grounding of the computer is required for operator safety and correct system function. Proper grounding of the electrical outlet can be verified by a certified electrician. Lenovo 3000 J Series...

  • Page 13: Safety Notices (Multi-Lingual Translations)

    Safety notices (multi-lingual translations) The caution and danger safety notices in this section are provided in the following languages: v English v Arabic v Brazilian/Portuguese v Chinese (simplified) v Chinese (traditional) v French v German v Hebrew v Italian v Korean v Spanish DANGER Electrical current from power, telephone and communication cables is hazardous.
  • Page 14 Laser radiation when open. Do not stare into the beam, do not view directly with optical instruments, and avoid direct exposure to the beam. ≥18 kg (37 lbs) ≥32 kg (70.5 lbs) ≥55 kg (121.2 lbs) CAUTION: Use safe practices when lifting. Lenovo 3000 J Series...
  • Page 15 CAUTION: The power control button on the device and the power switch on the power supply do not turn off the electrical current supplied to the device. The device also might have more than one power cord. To remove all electrical current from the device, ensure that all power cords are disconnected from the power source.
  • Page 16 Lenovo 3000 J Series...
  • Page 17 Chapter 2. Safety information...
  • Page 18 ≥18 kg (37 lbs) ≥32 kg (70.5 lbs) ≥55 kg (121.2 lbs) Lenovo 3000 J Series...
  • Page 19 PERIGO A corrente elétrica proveniente de cabos de alimentação, de telefone e de comunicações é perigosa. Para evitar risco de choque elétrico: v Não conecte nem desconecte nenhum cabo ou execute instalação, manutenção ou reconfiguração deste produto durante uma tempestade com raios. v Conecte todos os cabos de alimentação a tomadas elétricas corretamente instaladas e aterradas.
  • Page 20 Radiação a laser quando aberto. Não olhe diretamente para o feixe a olho nu ou com instrumentos ópticos e evite exposição direta ao feixe. ≥18 kg (37 lbs) ≥32 kg (70.5 lbs) ≥55 kg (121.2 lbs) CUIDADO: Utilize procedimentos de segurança para levantar equipamentos. Lenovo 3000 J Series...
  • Page 21 CUIDADO: O botão de controle de alimentação do dispositivo e o botão para ligar/desligar da fonte de alimentação não desligam a corrente elétrica fornecida ao dispositivo. O dispositivo também pode ter mais de um cabo de alimentação. Para remover toda a corrente elétrica do dispositivo, assegure que todos os cabos de alimentação estejam desconectados da fonte de alimentação.
  • Page 22 Lenovo 3000 J Series...
  • Page 23 Chapter 2. Safety information...
  • Page 24 Lenovo 3000 J Series...
  • Page 25 Chapter 2. Safety information...
  • Page 26 3. Branchez les câbles d’interface sur des 3. Débranchez les câbles d’interface des connecteurs. connecteurs. 4. Branchez les cordons d’alimentation sur 4. Débranchez tous les câbles des unités. des prises. 5. Mettez les unités SOUS TENSION. Lenovo 3000 J Series...
  • Page 27 ATTENTION: Remplacer la pile au lithium usagée par une pile de référence identique exclusivement, (référence 33F8354), ou suivre les instructions du fabricant qui en définit les équivalences. Si votre système est doté d’un module contenant une pile au lithium, vous devez le remplacer uniquement par un module identique, produit par le même fabricant.
  • Page 28 L’interrupteur de contrôle d’alimentation de l’unité et l’interrupteur dubloc d’alimentation ne coupent pas le courant électrique alimentantl’unité. En outre, le système peut être équipé de plusieurs cordonsd’alimentation. Pour mettre l’unité hors tension, vous devez déconnectertous les cordons de la source d’alimentation. Lenovo 3000 J Series...
  • Page 29 VORSICHT An Netz-, Telefon- und Datenleitungen können gefährliche Spannungen anliegen. Aus Sicherheitsgründen: v Bei Gewitter an diesem Gerät keine Kabel anschließen oder lösen. Ferner keine Installations-, Wartungs- oder Rekonfigurationsarbeiten durchführen. v Gerät nur an eine Schutzkontaktsteckdose mit ordnungsgemäß geerdetem Schutzkontakt anschließen. v Alle angeschlossenen Geräte ebenfalls an Schutzkontaktsteckdosen mit ordnungsgemäß...
  • Page 30 Laserstrahlung auftreten. VORSICHT Einige Lasergeräte enthalten eine Laserdiode der Klasse 3A oder 3B. Beachten Sie Folgendes: Laserstrahlung bei geöffneter Verkleidung. Nicht in den Strahl blicken. Keine Lupen oder Spiegel verwenden. Strahlungsbereich meiden. Lenovo 3000 J Series...
  • Page 31 ≥18 kg ≥32 kg ≥55 kg ACHTUNG: Arbeitsschutzrichtlinien beim Anheben der Maschine beachten. ACHTUNG: Mit dem Netzschalter an der Einheit und am Netzteil wird die Stromversorgung für die Einheit nicht unterbrochen. Die Einheit kann auch mit mehreren Netzkabeln ausgestattet sein. Um die Stromversorgung für die Einheit vollständig zu unterbrechen, müssen alle zum Gerät führenden Netzkabel vom Netz getrennt werden.
  • Page 32 Lenovo 3000 J Series...
  • Page 33 Chapter 2. Safety information...
  • Page 34 Lenovo 3000 J Series...
  • Page 35 PERICOLO La corrente elettrica proveniente dai cavi di alimentazione, del telefono e di comunicazione può essere pericolosa. Per evitare il rischio di scosse elettriche: v Non collegare o scollegare qualsiasi cavo oppure effettuare l’installazione, la manutenzione o la riconfigurazione del prodotto durante un temporale. v Collegare tutti i fili elettrici a una presa di alimentazione correttamente cablata e dotata di messa a terra.
  • Page 36 Alcune unità laser contengono un diodo laser di Classe 3A o Classe 3B. Tener presente quanto segue: Aprendo l’unità vengono emesse radiazioni laser. Non fissare il fascio, non guardarlo direttamente con strumenti ottici ed evitare l’esposizione al fascio. Lenovo 3000 J Series...
  • Page 37 ≥18 kg ≥32 kg ≥55 kg ATTENZIONE: Prestare attenzione nel sollevare l’apparecchiatura. ATTENZIONE: Il pulsante di controllo dell’alimentazione presente sull’unità e l’interruttore dell’alimentatore non disattivano l’alimentazione corrente fornita all’unità. E’ possibile che l’unità disponga di più cavi di alimentazione. Per disattivare l’alimentazione dall’unità, accertarsi che tutti i cavi di alimentazione siano scollegati dalla fonte di alimentazione.
  • Page 38 Lenovo 3000 J Series...
  • Page 39 Chapter 2. Safety information...
  • Page 40 3. Conecte los cables de señal a los 3. Desconecte los cables de señal de los conectores. conectores. 4. Enchufe los cables de alimentación a las 4. Desconecte todos los cables de los tomas de corriente. dispositivos. 5. Encienda el dispositivo. Lenovo 3000 J Series...
  • Page 41 PRECAUCIÓN: Cuando sustituya una batería de litio, utilice solamente una batería número de pieza 33F8354 u otra de tipo equivalente recomendada por el fabricante. Si su sistema dispone de un módulo que contiene una batería de litio, reemplácelo sólo con el mismo tipo de módulo, del mismo fabricante. La batería contiene litio y puede explotar si no se utiliza, manipula o desecha correctamente.
  • Page 42 Además, el dispositivo podría tener más de un cable de alimentación. Para suprimir toda la corriente eléctrica del dispositivo, asegúrese de que todos los cables de alimentación estén desconectados de la toma de corriente. Lenovo 3000 J Series...

  • Page 43: Chapter 3. General Information

    The Lenovo Care program also contains information to help solve problems and get repair service or other technical assistance. The Lenovo Care program is preinstalled on most Lenovo 3000 J Series products. Additional information resources If you have Internet access, the most up-to-date information for the computer is available from the World Wide Web.

  • Page 44: Specifications

    Voltage switch setting: 115 V ac High range: Minimum: 200 V ac Maximum: 240V ac Input frequency: 50-60 Hz Voltage switch setting: 230 V ac Input kilovolt-amperes (kVA) (approximate): Minimum configuration as shipped: 0.158 kVA Maximum configuration: 0.213 kVA Lenovo 3000 J Series...

  • Page 45: Machine Types 7390, 7391, 7392, 7396, 7397, And 7398

    Machine types 7390, 7391, 7392, 7396, 7397, and 7398 This section lists the physical specifications for the computer. Dimensions Width: 331 mm (13.0 in.) Height: 108 mm (4.3 in.) Depth: 405 mm (15.9 in.) Weight Minimum configuration as shipped: 8.2 kg (18.0 lbs) Maximum configuration: 8.3 kg (18.2 lbs) Environment Air temperature:...
  • Page 46 Lenovo 3000 J Series...

  • Page 47: Chapter 4. General Checkout

    If possible, have this information available when requesting assistance from Service Support and Engineering functions. v Machine type and model v Processor or hard disk upgrades v Failure symptom – Do diagnostics indicate a failure? © Lenovo 2006. Portions © IBM Corp. 2005, 2006.
  • Page 48 7. Have the same configuration options set in the system 8. Have the same setup for the operating system control files Comparing the configuration and software set-up between “working and non-working” systems will often lead to problem resolution. Lenovo 3000 J Series...

  • Page 49: Chapter 5. Diagnostics

    PC-Doctor for DOS Depending upon your machine type and model, you either have PC-Doctor for DOS or PC-Doctor for Windows PE on each Lenovo computer. The PC-Doctor for DOS diagnostic program is part of the Rescue and Recovery workspace and runs independently of the Windows operating system. Use PC-Doctor for DOS, if you are unable to start the Windows operating system or if PC-Doctor for Windows has not been successful in isolating a possible problem.

  • Page 50: Creating A Diagnostic Cd Image

    To create a diagnostic CD image, download a self-starting bootable CD image (known as an .iso image) of the diagnostic program from http:// www.lenovo.com/support/. After you download the image, you can create the CD using any CD burning software. If the computer does not have a CD burner or you do not have Internet access, see “Creating diagnostic diskettes.”...

  • Page 51: Running Diagnostics From The Rescue And Recovery Workspace

    PC-Doctor for Windows PE Depending upon your machine type and model, you either have PC-Doctor for DOS or PC-Doctor for Windows PE on each Lenovo computer. The PC-Doctor for Windows PE diagnostic program is part of the Rescue and Recovery workspace.

  • Page 52: Navigating Through The Diagnostics Programs

    Represents the type of error encountered. v DeviceID: Contains the component’s unit-ID which corresponds to either a fixed disk drive, removable media drive, serial or parallel port, processor, specific RIMM, or a device on the PCI bus. v Date: Lenovo 3000 J Series...

  • Page 53: Fixed Disk Advanced Test (Fdat)

    Contains the date when the diagnostic test was run. The date is retrieved from CMOS and displayed using the YYYYMMDD format. v ChkDigits: Contains a 2-digit check-digit value to ensure the following: – Diagnostics were run on the specified date. –...

  • Page 54: Quick And Full Erase - Hard Drive

    The diagnostics program offers two hard drive format utilities: v Quick Erase Hard Drive v Full Erase Hard Drive The Quick Erase Hard Drive provides a DOS utility that performs the following: v Destroys the Master Boot Record (MBR) on the hard drive. Lenovo 3000 J Series...

  • Page 55: Viewing The Test Log

    v Destroys all copies of the FAT Table on all partitions (both the master and backup). v Destroys the partition table. v Provides messages that warn the user that this is a non-recoverable process. The Full Erase Hard Drive provides a DOS utility that performs the following: v Performs all the steps in Quick Erase.
  • Page 56 Lenovo 3000 J Series...

  • Page 57: Chapter 6. Using The Setup Utility

    Setting, changing, and deleting a user password To set, change, or delete a user password, do the following: Note: A password can be any combination of up to eight characters (A- Z, a-z, and 0-9). © Lenovo 2006. Portions © IBM Corp. 2005, 2006.

  • Page 58: Administrator Or Supervisor Password

    1. From the Setup Utility program menu, select Set Administrator Password orSet Supervisor Password and press Enter. A message will display that indicates the password has been disabled. 2. Press any key to continue. Lenovo 3000 J Series...

  • Page 59: Selecting A Startup Device

    Selecting a startup device If the computer does not start up (boot) from a device such as the CD-ROM, diskette, or hard disk as expected, use one of the following procedures to select a startup device. Selecting a temporary startup device Use this procedure to startup from any boot device.
  • Page 60 Lenovo 3000 J Series...

  • Page 61: Chapter 7. Symptom-To-Fru Index

    On/Off Switch Power Supply connector v System Board Power Supply connectors v Microprocessor(s) connection Check the power cord for continuity. Power Cord Check the power-on switch for continuity. Power-on Switch © Lenovo 2006. Portions © IBM Corp. 2005, 2006.

  • Page 62: Diagnostic Error Codes

    2. Adapter card 3. System board 000-039-XXX 1. Flash the system. See “Flash update BIOS DMI data error procedures” on page 191 2. System board 000-195-XXX Information only BIOS Test aborted by user Re-start the test, if necessary Lenovo 3000 J Series...
  • Page 63 Diagnostic Error Code FRU/Action 000-196-XXX 1. Press F3 to review the log file BIOS test halt, error threshold exceeded 2. Re-start the test to reset the log file 000-197-XXX 1. Make sure the component that is called BIOS test warning out is connected and/or enabled.
  • Page 64 3. Go to “Undetermined problems” on page 001-199-XXX 1. Go to “Undetermined problems” on page System test failed, cause unknown 2. Flash the system and re-test 3. Replace component under function test 001-250-XXX System board System ECC error Lenovo 3000 J Series...
  • Page 65 Diagnostic Error Code FRU/Action 001-254-XXX System board 001-255-XXX 001-256-XXX 001-257-XXX System DMA error 001-260-XXX System board 001-264-XXX System IRQ error 001-268-XXX 1. Device on IRQ1 System IRQ1 failure 2. System board 001-269-XXX 1. Device on IRQ2 System IRQ2 failure 2. System board 001-270-XXX 1.
  • Page 66 3. Video card, if installed 4. System board 005-031-XXX 1. Video cable Video Device Cable failure 2. Monitor 3. Video card, if installed 4. System board 005-032-XXX 1. Video card, if installed Video Device Controller failure 2. System board Lenovo 3000 J Series...
  • Page 67 Diagnostic Error Code FRU/Action 005-036-XXX 1. Video card, if installed Video Register error 2. System board 005-038-XXX 1. Video card, if installed System BIOS extension failure 2. System board 005-040-XXX 1. Video card, if installed Video IRQ failure 2. System board 005-195-XXX Information only Video Test aborted by user...
  • Page 68 Serial port Test aborted by user Re-start the test, if necessary 011-196-XXX 1. Press F3 to review the log file Serial port test halt, error threshold exceeded 2. Re-start the test to reset the log file Lenovo 3000 J Series...
  • Page 69 Diagnostic Error Code FRU/Action 011-197-XXX 1. Make sure the component that is called Serial port test warning out is connected and/or enabled. See Chapter 6, “Using the Setup Utility,” on page 51 2. Re-run test 3. Replace the component that is called out in warning statement 4.
  • Page 70 2. Flash the system and re-test. See “Flash allocation failure update procedures” on page 191 3. Run memory test 4. System board 015-035-XXX 1. Remove USB device(s) and re-test USB port Reset condition detected 2. System board Lenovo 3000 J Series...
  • Page 71 Diagnostic Error Code FRU/Action 015-036-XXX System board USB port Register error 015-040-XXX 1. Run setup and check for conflicts USB port IRQ failure 2. Flash the system. See “Flash update procedures” on page 191 3. System board 015-195-XXX Information only USB port Test aborted by user Re-start the test, if necessary 015-196-XXX...
  • Page 72 PCI test warning out is connected and/or enabled. See Chapter 6, “Using the Setup Utility,” on page 51 2. Re-run test 3. Replace the component that is called out in warning statement 4. Replace the component under test Lenovo 3000 J Series...
  • Page 73 Diagnostic Error Code FRU/Action 020-198-XXX 1. If a component is called out, make sure PCI test aborted it is connected and/or enabled. See Chapter 6, “Using the Setup Utility,” on page 51 2. Flash the system and re-test. See “Flash update procedures”...
  • Page 74 SCSI interface test warning out is connected and/or enabled. See Chapter 6, “Using the Setup Utility,” on page 51 2. Re-run test 3. Replace the component that is called out in warning statement 4. Replace the component under test Lenovo 3000 J Series...
  • Page 75 Diagnostic Error Code FRU/Action 030-198-XXX 1. If a component is called out, make sure SCSI interface test aborted it is connected and/or enabled. See Chapter 6, “Using the Setup Utility,” on page 51 2. Flash the system and re-test. See “Flash update procedures”...
  • Page 76 No action Game Port interface Test Passed 080-XXX-XXX 1. Remove the game port device and Game Port interface Error re-test the system 080-195-XXX Information only Game Port interface Test aborted by user Re-start the test, if necessary Lenovo 3000 J Series...
  • Page 77 Diagnostic Error Code FRU/Action 080-196-XXX 1. Press F3 to review the log file Game Port interface test halt, error threshold 2. Re-start the test to reset the log file exceeded 080-197-XXX 1. Make sure the component that is called Game Port interface test warning out is connected and/or enabled.
  • Page 78 1. See “Undetermined problems” on page Microprocessor test failed, cause unknown 2. Flash the system and re-test. See “Flash update procedures” on page 191 3. Replace component under function test 170-000-XXX No action Voltage Sensor(s) Test Passed Lenovo 3000 J Series...
  • Page 79 Diagnostic Error Code FRU/Action 170-0XX-XXX 1. Flash system Voltage Sensor(s) failure 2. System board 170-195-XXX Information only Voltage Sensor(s) Test aborted by user Re-start the test, if necessary 170-196-XXX 1. Press F3 to review the log file Voltage Sensor(s) test halt, error threshold 2.
  • Page 80 1. Cache, if removable System Cache error 2. System board 3. Microprocessor 206-000-XXX No action Diskette Drive Test Passed 206-XXX-XXX 1. Diskette Drive Cable Diskette Drive error 2. Check power supply voltages 3. Diskette drive 4. System board Lenovo 3000 J Series...
  • Page 81 Diagnostic Error Code FRU/Action 215-000-XXX No action CD-ROM Drive Test Passed 215-XXX-XXX 1. CD-ROM Drive Cable CD-ROM Drive error 2. Check power supply voltages 3. CD-ROM drive 4. System board 217-000-XXX No action Hard Disk Drive Test Passed 217-25X-XXX 1. Hard Disk Drive Cable 217-26X-XXX 2.
  • Page 82 Diagnostic Error Code FRU/Action 415-000-XXX No action Modem Test Passed 415-XXX-XXX Remove the Modem and re-test the system Modem error Lenovo 3000 J Series...

  • Page 83: Beep Symptoms

    Beep symptoms Beep symptoms are tones or a series of tones separated by pauses (intervals without sound) during POST. The following table describes beep symptoms. Beep Symptom FRU/Action 2 short beeps Perform the following actions in order. CMOS setting error 1.

  • Page 84: Post Error Codes

    This message displays during a full memory test, counting down the memory areas being tested. Memory test fail If POST detects an error during memory testing, additional information appears. This information gives specifics about the type and location of the memory error. Lenovo 3000 J Series...
  • Page 85 POST Error Message Description/Action Press TAB to show POST screen Pressing the TAB key permits the user to toggle between the default POST display screen and a custom POST display screen. Error: Non-System disk or disk error The BIOS was unable to find a suitable boot Replace and press any key when ready device.

  • Page 86: Miscellaneous Error Messages

    Intensity or color varies from left to right of 1. Display characters and color bars 2. Video adapter (if present) 3. System Board No power or fan not running 1. See “Power Supply Problems” on page Lenovo 3000 J Series...

  • Page 87: Undetermined Problems

    Message/Symptom FRU/Action Non-system disk or disk error-type message 1. Diskette Drive with a known-good diagnostic diskette. 2. System Board 3. Diskette Drive Cable Other display symptoms not listed above 1. Display (including blank or illegible display) 2. System Board Power-on indicator or hard disk drive in-use 1.
  • Page 88 3. Power-on the computer to re-test the system. 4. Repeat steps 1 through 3 until you find the failing device or adapter. If all devices and adapters have been removed, and the problem continues, replace the system board. Lenovo 3000 J Series...

  • Page 89: Chapter 8. Replacing Frus (Types 7387, 7388, 7389, 7393, 7394, And 7395)

    This chapter does not contain a remove and replace procedure for all FRUs. Only the major FRUs are documented. Note: The computer might look slightly different than the illustrations in this chapter. © Lenovo 2006. Portions © IBM Corp. 2005, 2006.

  • Page 90: Rear Connectors

    1. Shut down the operating system, remove any media (DVDs, CDs, or tapes) from the drives, and turn off all attached devices. 2. Unplug all power cords from electrical outlets. Lenovo 3000 J Series...
  • Page 91 3. Disconnect all cables attached to the computer. This includes power cords, input/output (I/O) cables, and any other cables that are connected to the computer. 4. Remove the two thumb screws at the rear of the left-side cover and slide the cover to the rear to remove.

  • Page 92: Locations

    The following illustration will help you locate the major FRUs in the computer. Heat sink and fan Front panel card Microprocessor Hard disk drive Memory modules System board Optical drive System fan Diskette drive Power supply Lenovo 3000 J Series...

  • Page 93: Identifying Parts On The System Board

    Identifying parts on the system board There are different system boards depending on the machine type. Machine Types 7387, 7388, and 7389 Microprocessor fan Front panel (power switch/LED) connector connector Microprocessor and heat SATA IDE connectors (2) sink Memory connector 1 Front USB connectors (2) Memory connector 2 Serial (COM2 connector)

  • Page 94: Machine Types 7393, 7394, And 7395

    PCI Express x1 graphics adapter connector Diskette drive connector CMOS battery IDE connector PCI Express x16 graphics adapter connector SATA IDE connectors (2) System fan connector Front panel (power 12V power connector switch/LED) connector Clear CMOS/Recovery jumper Lenovo 3000 J Series...

  • Page 95: Removing And Replacing The Front Bezel

    Removing and replacing the front bezel The front bezel must be removed to replace some FRUs. 1. Remove both the left-side and right-side covers. See “Removing the covers” on page 84. 2. Disconnect the cable for the power switch/LED assembly from the system board.

  • Page 96: Replacing A Memory Module

    2 on the socket. Insert the memory module straight down into the connector until it snaps into position and the retaining clips are closed. 5. Go to “Completing the FRU replacement” on page 112. Lenovo 3000 J Series...

  • Page 97: Replacing A Pci Adapter

    Replacing a PCI adapter 1. Remove the left-side cover. See “Removing the covers” on page 84. 2. Remove the screw securing the adapter being replaced. 3. Pull the adapter straight out of the PCI connector. 4. Remove the new adapter from its static-protective package. 5.

  • Page 98: Replacing The Cmos Battery

    Note: When the computer is turned on for the first time after battery replacement, an error message might be displayed. This is normal after replacing the battery. 9. Go to “Completing the FRU replacement” on page 112. Lenovo 3000 J Series...

  • Page 99: Replacing The Power Supply

    Replacing the power supply Attention Never remove the cover on a power supply or any part that has the following label attached. Hazardous voltage, current, and energy levels are present inside any component that has this label attached. There are no servicable parts inside these components.

  • Page 100: Replacing The System Board (Types 7393, 7394, And 7395)

    8. Remove the four screws 1 securing the heat sink and fan assembly to the system board. 9. Lift the heat sink and fan assembly off the failing system board. Lay the heat sink on its side so that the thermal grease does not come in contact with anything. Lenovo 3000 J Series...
  • Page 101 10. Lift the small handle 3 and open the retainer 1 . 11. Lift the microprocessor 2 straight up and out of the system board socket. Notes: a. Your microprocessor and socket might look different than the one illustrated. b. Note the orientation of the notches on the microprocessor. This is important when reinstalling the microprocessor on the new system board.
  • Page 102 Insert and tighten the screws that secure the system board. 20. Connect all the cables to the system board. See “Identifying parts on the system board” on page 87. 21. Go to “Completing the FRU replacement” on page 112. Lenovo 3000 J Series...

  • Page 103: Replacing The System Board (Types 7387, 7388, And 7389)

    Replacing the system board (Types 7387, 7388, and 7389) 1. Remove only the left-side cover. See “Removing the covers” on page 84. 2. Lay the computer on the right side to make the system board accessible. 3. Remove any adapter cards installed in the PCI connectors. See “Replacing a PCI adapter”...
  • Page 104 This is important when reinstalling the microprocessor on the new system board. c. Do not drop anything onto the microprocessor socket while it is exposed. The socket pins must be kept as clean as possible. Lenovo 3000 J Series...
  • Page 105 13. Holding the microprocessor with your fingers, position the microprocessor so that the small triangle 1 is aligned with the corresponding triangle on the socket. 14. Lower the microprocessor straight down into the socket. 15. Lower and latch the handle to secure the microprocessor in the socket. 16.

  • Page 106: Replacing The Microprocessor (Types 7393, 7394, And 7395)

    Notice that there is a retention bracket on the back side of the system board. 5. Lift the heat sink and fan assembly off the failing system board. Lay the heat sink on its side so that the thermal grease does not touch anything. Lenovo 3000 J Series...
  • Page 107 6. Lift the small handle 3 and open the retainer 1 . Important Touch only the sides of the microprocessor. Do not touch the gold contacts on the bottom. 7. Lift the microprocessor 2 straight up and out of the socket. Chapter 8.
  • Page 108 2 that protects the gold contacts on the new microprocessor 1 . 9. Make sure that the microprocessor retainer is fully open. 10. Lower the microprocessor straight down into the socket. 11. Lock the retainer with the small handle to secure the microprocessor in the socket. Lenovo 3000 J Series...
  • Page 109 12. Use the thermal grease syringe to place five drops of grease on the top of the microprocessor. Each drop of grease should be 0.03ml (3 tick marks on the grease syringe). 13. Install the heat sink and fan assembly on the system board. 14.

  • Page 110: Replacing The Microprocessor (Types 7387, 7388, And 7389)

    5. Lift the heat sink and fan assembly off the failing system board. Lay the heat sink on its side so that the thermal grease does not touch anything. 6. Lift the small handle 1 . Lenovo 3000 J Series...
  • Page 111 7. Lift the microprocessor 2 straight up and out of the socket. Notes: a. Your microprocessor and socket might look different than the one illustrated. b. Note the orientation of the microprocessor in the socket. Look for the small triangle on one corner of the microprocessor. This is important when reinstalling the microprocessor on the new system board.
  • Page 112 14. Install the heat sink and fan assembly on the system board. 15. Connect the heat sink and fan assembly cable to the system board. See “Identifying parts on the system board” on page 87. 16. Go to “Completing the FRU replacement” on page 112. Lenovo 3000 J Series...

  • Page 113: Replacing The Primary Hard Disk Drive

    Replacing the primary hard disk drive Important When you install a new hard disk drive, you also need a set of Product Recovery discs. The set of Product Recovery discs will enable the contents of the hard disk to be restored to the same state as when the computer was originally shipped from the factory.

  • Page 114: Replacing An Optical Drive

    6. Slide the new drive into the bay until the screws holes on each side are aligned and install two screws in each side of the drive. 7. Reconnect the power cable and signal cable to the new optical drive. 8. Go to “Completing the FRU replacement” on page 112. Lenovo 3000 J Series...

  • Page 115: Replacing The Diskette Drive

    Replacing the diskette drive 1. Remove the left-side and right-side covers. See “Removing the covers” on page 2. Disconnect the signal and power cables from the rear of the hard disk drive. Note: You will probably have to disconnect cables that are connected to the system board and other drives to allow the diskette drive to be removed from inside the chassis.

  • Page 116: Replacing The Power Switch/ Led Assembly

    6. Reinstall the bezel. See “Removing and replacing the front bezel” on page 89. 7. Reconnect the power switch/LED cable to the system board. 8. Go to “Completing the FRU replacement” on page 112. Lenovo 3000 J Series...

  • Page 117: Replacing The Front Panel Card Assembly

    Replacing the front panel card assembly 1. Remove the left-side and right-side covers. See “Removing the covers” on page 2. Remove the front bezel. See “Removing and replacing the front bezel” on page 3. Disconnect the front USB cable and the front audio cable from the system board.

  • Page 118: Completing The Fru Replacement

    4. If you have replaced the system board, you must update (flash) the BIOS. See “Flash update procedures” on page 191. 5. Some FRU replacements require the configuration to be updated. See Chapter 6, “Using the Setup Utility,” on page 51. Lenovo 3000 J Series...

  • Page 119: Chapter 9. Replacing Frus (Types 7390, 7391, 7392, 7396, 7397, And 7398)

    This chapter does not contain a remove and replace procedure for all FRUs. Only the major FRUs are documented. Note: The computer might look slightly different than the illustrations in this chapter. © Lenovo 2006. Portions © IBM Corp. 2005, 2006.

  • Page 120: Rear Connectors

    6 before opening the cover. To remove the computer cover: 1. Remove any media (diskettes, CDs, or tapes) from the drives, shut down the operating system, and turn off all attached devices. 2. Unplug all power cords from electrical outlets. Lenovo 3000 J Series...

  • Page 121: Locations

    3. Disconnect all cables attached to the computer. This includes power cords, input/output (I/O) cables, and any other cables that are connected to the computer. 4. Remove any locking devices such as a padlock that secure the cover. 5. Remove the two screws at the rear of the computer cover and slide the cover to the rear.

  • Page 122: Identifying Parts On The System Board

    Power supply connector Front audio connector Diskette drive connector PCI Express x16 graphics adapter connector IDE connector 1 PCI Express x1 graphics adapter connector IDE connector 2 System fan connector CMOS battery 12V power connector Lenovo 3000 J Series...

  • Page 123: Machine Types 7396, 7397, And 7398

    Machine Types 7396, 7397, and 7398 Microprocessor and heat Front USB connectors (2) sink Microprocessor fan Serial (COM2) connector connector Memory connector 1 Front audio connectors Memory connector 2 PCI adapter connectors (2) Power connector PCI Express x1 graphics adapter connector Diskette drive connector CMOS battery IDE connector...

  • Page 124: Removing And Replacing The Drive Bay Assembly

    1. Remove the computer cover. See “Removing the cover” on page 114. 2. Remove the front bezel by releasing the three tabs and pivoting the top of the bezel outward. 3. Remove the two screws at the front of the chassis securing the drive bay assembly. Lenovo 3000 J Series...
  • Page 125 4. Slide the drive bay assembly forward until it stops. Disconnect the power supply and signal cables from the drives. Pivot the rear of the drive bay assembly upward to remove it completely from the computer. Note: To allow easier access to the cables, lift the fan plenum off the heat sink. See “Locations”...

  • Page 126: Replacing A Memory Module

    6. Replace the drive bay assembly. See “Removing and replacing the drive bay assembly” on page 118. 7. Go to “Completing the FRU replacement” on page 144. Lenovo 3000 J Series...

  • Page 127: Replacing A Pci Adapter

    Replacing a PCI adapter 1. Remove the computer cover. See “Removing the cover” on page 114. 2. Remove the screw that secures the adapter retainer and remove the retainer. 3. Remove the failing adapter. 4. Remove the new adapter from its static-protective package. 5.

  • Page 128: Replacing The Cmos Battery

    Note: When the computer is turned on for the first time after battery replacement, an error message might be displayed. This is normal after replacing the battery. 9. Go to “Completing the FRU replacement” on page 144. Lenovo 3000 J Series...

  • Page 129: Replacing The Power Supply

    Replacing the power supply Attention Never remove the cover on a power supply or any part that has the following label attached. Hazardous voltage, current, and energy levels are present inside any component that has this label attached. There are no servicable parts inside these components.
  • Page 130 See “Identifying parts on the system board” on page 116. Make sure the cables are correctly routed. 13. Replace the drive bay assembly. See “Removing and replacing the drive bay assembly” on page 118. 14. Go to “Completing the FRU replacement” on page 144. Lenovo 3000 J Series...

  • Page 131: Replacing The System Board (Types 7396, 7397, And 7398)

    Replacing the system board (Types 7396, 7397, and 7398) Note: When replacing the system board, a new retention bracket for the microprocessor heat sink is required. Make sure you have a new retention bracket before beginning this procedure. 1. Remove the cover. See “Removing the cover” on page 114 2.
  • Page 132 12. Lift the heat sink and fan assembly off the failing system board. Lay the heat sink on its side so that the thermal grease does not come in contact with anything. 13. Lift the small handle 3 and open the retainer 1 . Lenovo 3000 J Series...
  • Page 133 Important Touch only the sides of the microprocessor. Do not touch the gold contacts on the bottom. 14. Lift the microprocessor 2 straight up and out of the socket. Notes: a. Note the orientation of the notches 1 on the microprocessor. This is important when reinstalling the microprocessor on the new system board.
  • Page 134 26. Reinstall any PCI adapter cards that were removed. See “Replacing a PCI adapter” on page 121. 27. Position the fan duct on the heat sink fan. 28. Go to “Completing the FRU replacement” on page 144. Lenovo 3000 J Series...

  • Page 135: Replacing The System Board (Types 7390, 7391, And 7392)

    Replacing the system board (Types 7390, 7391, and 7392) 1. Remove the cover. See “Removing the cover” on page 114. 2. Lift the fan duct off the heat sink fan. 3. Remove any adapter cards installed in the PCI connectors. See “Replacing a PCI adapter”...
  • Page 136 This is important when reinstalling the microprocessor on the new system board. c. Do not drop anything onto the microprocessor socket while it is exposed. The socket pins must be kept as clean as possible. Lenovo 3000 J Series...
  • Page 137 16. Holding the microprocessor with your fingers, position the microprocessor so that the small triangle 1 on one corner is aligned with the corresponding triangle on the socket. 17. Make sure that the small handle is in the raised position. 18.

  • Page 138: Replacing The Microprocessor (Types 7396, 7397, And 7398)

    4. Remove the four screws securing the heat sink and fan assembly to the system board. Notice that there is a retention bracket on the back side of the system board. 5. Lift the heat sink and fan assembly off the failing system board. Lenovo 3000 J Series...
  • Page 139 6. Lift the small handle 3 and open the retainer 1 . Important Touch only the sides of the microprocessor. Do not touch the gold contacts on the bottom. 7. Lift the microprocessor 2 straight up and out of the socket. Chapter 9.
  • Page 140 10. Holding the microprocessor with your fingers, position the microprocessor so that the notches on the microprocessor are aligned with the tabs in the microprocessor socket. Important To avoid damaging the microprocessor contacts, do not tilt the microprocessor when installing it into the socket. Lenovo 3000 J Series...
  • Page 141 11. Lower the microprocessor straight down into the system board socket of the system board. 12. Lower the microprocessor retainer. 13. Lock the retainer with the small handle to secure the microprocessor in the socket. 14. Use the thermal grease syringe to place five drops of grease on the top of the microprocessor.

  • Page 142: Replacing The Microprocessor (Types 7390, 7391, And 7392)

    “Identifying parts on the system board” on page 116. 4. Rotate handle 1 to release the heat sink clamp and then disengage the clamp from the plastic retention bracket. 5. Lift the heat sink and fan assembly off the system board. Lenovo 3000 J Series...
  • Page 143 6. Lift the small handle 1 . Important Do not touch the gold contacts on the bottom of the microprocessor. If you must touch the microprocessor, touch only the sides. 7. Lift the microprocessor 2 straight up and out of the socket. Notes: a.
  • Page 144 2 that protects the gold contacts on the new microprocessor 1 . 11. Lower the microprocessor straight down into the system board socket of the new system board. 12. Lower and latch the handle to secure the microprocessor in the socket. Lenovo 3000 J Series...
  • Page 145 13. Use the thermal grease syringe to place five drops of grease on the top of the microprocessor. Each drop of grease should be 0.03ml (3 tick marks on the grease syringe). 14. Install the heat sink and fan assembly on the system board. 15.

  • Page 146: Replacing The Hard Disk Drive

    10. Slide the hard disk drive bracket to the right until the screw holes are aligned and install the screws. 11. Reinstall the drive bay assembly and connect the power and signal cables to the drives. 12. Go to “Completing the FRU replacement” on page 144. Lenovo 3000 J Series...

  • Page 147: Replacing An Optical Drive

    Replacing an optical drive 1. Remove the cover. See “Removing the cover” on page 114. 2. Remove the drive bay assembly. See “Removing and replacing the drive bay assembly” on page 118. 3. Remove the screws that secure the drive in the drive bay assembly. 4.

  • Page 148: Replacing The Diskette Drive

    6. Reinstall the drive bay assembly. See “Removing and replacing the drive bay assembly” on page 118. 7. Go to “Completing the FRU replacement” on page 144. Lenovo 3000 J Series...

  • Page 149: Replacing The Power Switch/ Led Assembly

    Replacing the power switch/ LED assembly 1. Remove cover. See “Removing the cover” on page 114. 2. Remove the drive bay assembly. See “Removing and replacing the drive bay assembly” on page 118. 3. Remove the hard disk drive. See “Replacing the hard disk drive” on page 140. 4.

  • Page 150: Replacing The Front Panel Card

    This is a normal sequence to enable the computer to initialize. 1. Ensure that all components have been reassembled correctly and that no tools or loose screws are left inside the computer. 2. Replace the cover and secure it with two screws. Lenovo 3000 J Series...
  • Page 151 3. Reconnect the external cables and power cords to the computer. See “Rear connectors” on page 114. 4. If you have replaced the system board, you must update (flash) the BIOS. See “Flash update procedures” on page 191. 5. Some FRU replacements require the configuration to be updated. See Chapter 6, “Using the Setup Utility,”...
  • Page 152 Lenovo 3000 J Series...

  • Page 153: Chapter 10. Fru Lists

    “Y“ if the FRU is RoHS compliant or an “N“ if the FRU is not RoHS compliant. Please read “Important information about replacing RoHS compliant FRUs” on page 2 before replacing any FRUs. © Lenovo 2006. Portions © IBM Corp. 2005, 2006.

  • Page 154: Machine Type 7387

    Diskette drive, w/bezel (models) Front panel card (USB/Audio) assembly (all models) 41N5330 Hard disk drive, 80GB, 7200rpm, serial ATA (models 23S 23P 23Y) 40Y9034 Hard disk drive, 80GB, 7200rpm, serial ATA (models 23S 23P 23Y) 41X2500 Lenovo 3000 J Series...
  • Page 155 Item 7387 FRUs FRU# Tier RoHS? Hard disk drive, 160GB, 7200rpm, serial ATA (models 21G 21B 22U 22S 40Y9035 22P 22M 24U 24F 24S 24P 24Y 41U 41F 41S 41P 41Y 21Q) Hard disk drive, 250GB, 7200rpm, serial ATA (models 25G 26U 26F 27U 40Y9036 27F 28G 42M 42A 42T 43V 44U 44F 45G 26S 26Y 27S 27Y 44S 44Y) System board, nVidia C51g (models 21G 21B 22U 22S 22P 22M 23S 23P...
  • Page 156 US Euro (models 21G 25G 28G 45G) 41A4998 Slovenian (models 21G 25G 28G 45G) 41A4999 7387 mice FRU# Tier RoHS? Mouse, USB Optical Wheel (all models) 41A5085 Mouse, USB Optical Wheel - Logitec (all models) 41A5089 Lenovo 3000 J Series...
  • Page 157 Internal USB Memory Card Reader (models 24U 24F 24S 24P 24Y 25G 26U 26F 41X2089 28G 42M 42A 42T 43V 44U 44F 45G 26S 26Y 27S 27Y 44S 44Y) Speakers (2-piece) (Lenovo logo) (models 24U 24F 24S 24P 24Y 26U 26F 44U 44F 41A5331 26S 26Y 44S 44Y)
  • Page 158 42Y4204 CZ (models 21G 28G) 42Y4205 HE (models 21G 28G) 42Y4206 PL (models 21G 28G) 42Y4207 TR (models 21G 28G) 42Y4208 HU (models 21G 28G) 42Y4209 PO (models 21G 28G) 42Y4210 GK (models 21G 28G) 42Y4211 Lenovo 3000 J Series...
  • Page 159 7387 Windows XP Pro Recovery CDs FRU# Tier RoHS? SL (models 21G 28G) 42Y4212 Taiwan - TC (models 43V) 42T8695 Hong Kong - TC (models 21B) 42T8702 Multilingual 1 (models 21G 28G) 42Y4427 Multilingual 2 (models 21G 28G) 42Y4428 7387 Corel Education CDs FRU# Tier RoHS?

  • Page 160: Machine Type 7388

    System Fan, rear w/grill (all models) 41N5339 Power supply, 250W, RoHS (models 21G 22G 41G) 41N3127 Power supply, 280W, ATX, Standard (models 21G 22G 41G) 41N3479 The FRUs listed in the following table are not illustrated. Lenovo 3000 J Series...
  • Page 161 7388 FRUs FRU# Tier RoHS? Cable, SATA 250mm (all models) 41A7145 Cable, diskette drive (RoHs) (all models) 41A7130 Mechanical kit, side cover (all models) 41N5333 Mechanical kit (all models) 41N5331 Main bezel kit (all models) 41N5283 Power switch/LED assembly (all models) 41N5284 Shield, system board (all models) 41N5329...
  • Page 162 42Y4315 IT (models 21G 41G) 42Y4316 AE (models 21G 41G) 42Y4318 RU (models 21G 41G) 42Y4319 SV (models 21G 41G) 42Y4320 DK (models 21G 41G) 42Y4321 FI (models 21G 41G) 42Y4322 NO (models 21G 41G) 42Y4323 Lenovo 3000 J Series...
  • Page 163 7388 Windows XP Home Recovery CDs FRU# Tier RoHS? NL (models 21G 41G) 42Y4324 CZ (models 21G 41G) 42Y4325 HE (models 21G 41G) 42Y4326 PL (models 21G 41G) 42Y4327 TR (models 21G 41G) 42Y4328 HU (models 21G 41G) 42Y4329 PO (models 21G 41G) 42Y4330 GK (models 21G 41G) 42Y4331...

  • Page 164: Machine Type 7389

    Power supply, 250W, RoHS (models 41M 41A) 41N3127 Power supply, 250W, Robust (models 42V) 41N3460 Power supply, 280W, ATX, Standard (models 41M 41A) 41N3479 Power supply, 280W, Robust (models 42V) 41N3482 The FRUs listed in the following table are not illustrated. Lenovo 3000 J Series...
  • Page 165 7389 FRUs FRU# Tier RoHS? Cable, SATA 250mm (all models) 41A7145 Cable, diskette drive (RoHs) (all models) 41A7130 Mechanical kit, side cover (all models) 41N5333 Mechanical kit (all models) 41N5331 Main bezel kit (all models) 41N5283 Power switch/LED assembly (all models) 41N5284 Shield, system board (all models) 41N5329...

  • Page 166: Machine Type 7390

    Front I/O (USB/Audio) Cable Assembly (all models) 41N5270 Memory module, 512MB PC2-4200 -533MHz - DDR2 SDRAM (models 21B 41X4251 21V 21J 22M 22Q 22H) Memory module, 1GB PC2-4200 -533MHz - DDR2 SDRAM (models 41B 41X 4252 42H) Lenovo 3000 J Series...
  • Page 167 L1 IEEE 1394 PCI Adapter (models 41B 42H) 41D2781 Internal USB Memory Card Reader (models 21B 21V 21J 22M 22Q 22H 41B 42H) 41X2089 Speakers (2-piece) (Lenovo logo) (models 21B 21V 21J 22M 22Q 22H) 41A5334 Chapter 10. FRU lists...
  • Page 168 7390 Adapters and miscellaneous FRUs FRU# Tier RoHS? Speakers (2-piece) (Lenovo logo) (models 21B 21V 21J 22M 22Q 22H) 41A5331 Speakers (2-piece) (Lenovo logo) (models 21B 21V 21J 22M 22Q 22H) 41A5334 Speaker Power brick - China, Thailand (models 21B 22H)

  • Page 169: Machine Type 7392

    Machine Type 7392 Item 7392 FRUs FRU# Tier RoHS? Heat Sink/RM Kit, AMD Athlon/Sempron (all models) 41N8249 Microprocessor, 3800+ Athlon64 AM2 X2 (2.0 GHz processor, 89W) 41X4241 (models 21B 22H) Combo 48 -32 -48 -16 - - DVD - ROM - CDRW (models 21B 22H) 41X3547 Combo 48 -32 -48 -16 - - DVD - ROM - CDRW (models 21B 22H) 41X3548...
  • Page 170 7392 Adapters and miscellaneous FRUs FRU# Tier RoHS? Internal USB Memory Card Reader (models 21B 22H) 41X2089 Speakers (2-piece) (Lenovo logo) (models 21B 22H) 41A5334 Speakers (2-piece) (Lenovo logo) (models 21B 22H) 41A5331 Speaker Power brick - China, Thailand (models 21B 22H) 89P8581...

  • Page 171: Machine Type 7393

    Machine Type 7393 Item 7393 FRUs FRU# Tier RoHS? FRU, Heat Sink/RM Kit, Intel Prescott, Cedar Mill, Smithfield, Presler (all 41N8261 models) Microprocessor, Intel 820 - A0 Smithfield (models 21U 21F 21S 21P 21Y 22U 41T1704 22F 22S 22P 22Y 23V 24U 24F 24S 24P 24Y 25G 26U 26F 27F 22Q 26S 26Y 27S 27Y) Microprocessor, Intel 925 (models 51U 51F 51M 51A 51T 52G 53B 54H 55U 41X2413...
  • Page 172 Cable, SATA 250mm (all models) 41A7145 Cable, diskette drive (RoHs) (all models) 41A7130 Mechanical kit, side cover (all models) 41N5333 Mechanical kit (all models) 41N5331 Main bezel kit (all models) 41N5283 Power switch/LED assembly (all models) 41N5284 Lenovo 3000 J Series...
  • Page 173 7393 FRUs FRU# Tier RoHS? Shield, system board (945GZ) (all models) 41N5286 Miscellaneous hardware kit (all models) 41N5334 Cable, hard disk drive and optical drive signal (2-drop) (all models) 41A7875 Card Reader Bezel (all models) 41N5340 7393 Keyboards (USB Preferred - Fullwidth) FRU# Tier RoHS?
  • Page 174 24S 24P 24Y 25G 27F 51U 51F 51M 51A 51T 52G 56U 56F 57G 57V 58G 22Q 27S 27Y 51S 51Y 56S 56Y 91G 92M 93V) Speakers (2-piece) (Lenovo logo) (models 24U 24F 24S 24P 24Y 27F 56U 56F 27S 41A5331...
  • Page 175 7393 Power Cords FRU# Tier RoHS? Power Cord (LA High Volt (APU) (models 21Y 22Y 24Y 55Y 26Y 27Y 51Y 56Y) 39M5067 Power Cord (Australia, New Zealand) (models 51M 92M) 39M5102 Power Cord (Hong Kong) (models 53B 54H 94B 94H) 39M5151 Power Cord (UK, Ireland, Singapore, Malaysia, Brunei) (models 25G 51A 52G 57G 39M5150...
  • Page 176 CF (models 21F 22F 24F 26F 27F 51F 55F 56F) 41X0443 LA (models 21S 21Y 22S 22Y 24S 24Y 55S 55Y 27S 27Y 26S 26Y 51S 51Y 56S 56Y ) 41X0446 BR (models 21P 22P 24P 55P) 41X0449 Lenovo 3000 J Series...

  • Page 177: Machine Type 7394

    Machine Type 7394 Item 7394 FRUs FRU# Tier RoHS? FRU, Heat Sink/RM Kit, Intel Prescott, Cedar Mill, Smithfield, Presler (all 41N8261 models) Microprocessor, Intel 820 - A0 Smithfield (models 21G) 41T1704 Microprocessor, Intel 925 (models 41G 42G) 41X2413 Memory module, 512MB PC2-4200 - 533MHz - DDR2 SDRAM (models 41X4251 21G) Memory module, 1GB PC2-4200 - 533MHz - DDR2 SDRAM (models 41G...
  • Page 178 Slovak (models 21G 41G 42G 91G) 41A4990 Spanish (models 21G 41G 42G 91G) 41A4991 Swedish/Finn (models 21G 41G 42G 91G) 41A4992 Swiss F/G (models 21G 41G 42G 91G) 41A4993 Turkish 440 (models 21G 41G 42G 91G) 41A4995 Lenovo 3000 J Series...
  • Page 179 7394 Keyboards (USB, Productivity) FRU# Tier RoHS? Turkish 179 (models 21G 41G 42G 91G) 41A4996 UK English (models 21G 41G 42G 91G) 41A4997 US Euro (models 21G 41G 42G 91G) 41A4998 Slovenian (models 21G 41G 42G 91G) 41A4999 7394 mice FRU# Tier RoHS?
  • Page 180 TR (models 42G 91G) 42Y4208 HU (models 42G 91G) 42Y4209 PO (models 42G 91G) 42Y4210 GK (models 42G 91G) 42Y4211 SL (models 42G 91G) 42Y4212 Multilingual 1 (models 42G 91G) 42Y4427 Multilingual 2 (models 42G 91G) 42Y4428 Lenovo 3000 J Series...

  • Page 181: Machine Type 7395

    Machine Type 7395 Item 7395 FRUs FRU# Tier RoHS? FRU, Heat Sink/RM Kit, Intel Prescott, Cedar Mill, Smithfield, Presler (all 41N8261 models) Microprocessor, Intel 820 - A0 Smithfield (models 21M 21A 22V) 41T1704 Microprocessor, Intel 925 (models 41B 42H 43M 43A 44V) 41X2413 Microprocessor, CONROE E6300 1066/1860MHZ-2M (models 91S 91P 91Y 41X2495...
  • Page 182 41A5289 Chinese/US (models 41B) 41A5296 7395 Keyboards (USB, Productivity) FRU# Tier RoHS? US English (models 43M 43A 91M 91H) 41A4961 Brazilian (models 91P) 41A4966 Hong Kong/Taiwan (models 44V 91B) 41A4968 LA Spanish (models 91S 91Y) 41A4983 Lenovo 3000 J Series...
  • Page 183 7395 Keyboards (Fingerprint Reader, USB) FRU# Tier RoHS? US English (models 21M 21A) 41A5248 Chinese/US (models 22V) 41A5255 7395 mice FRU# Tier RoHS? Mouse, USB Optical Wheel (all models) 41A5085 Mouse, USB Optical Wheel - Logitec (all models) 41A5089 7395 Adapters and miscellaneous FRUs FRU# Tier RoHS?

  • Page 184: Machine Type 7396

    Front I/O (USB/Audio) Cable Assembly (all models) 41N5270 Memory module, 512MB PC2-4200 - 533MHz - DDR2 SDRAM (models 41X4251 21M 21A 21Q 21T 21H 22G 22V 23G 24B 25H) Memory module, 1GB PC2-4200 - 533MHz - DDR2 SDRAM (models 41M 41X4252 42G) Lenovo 3000 J Series...
  • Page 185 Item 7396 FRUs FRU# Tier RoHS? System board, 945GZ - Intel based (models 21M 21A 21Q 21T 21H 22G 41X1359 22V 23G 24B 25H 41M 42G) Note: When you order a new system board you must also order a new retention bracket for the heat sink.
  • Page 186 Bulgarian (models 42G) 41A5254 Chinese/US (models 42G) 41A5255 Czech (models 42G) 41A5256 Danish (models 42G) 41A5257 Dutch (models 42G) 41A5258 French (models 42G) 41A5259 French Canadian 445 (models 42G) 41A5260 French Canadian 58 (models 42G) 41A5261 Lenovo 3000 J Series...
  • Page 187 7396 Keyboards (Fingerprint Reader, USB) FRU# Tier RoHS? German (models 42G) 41A5262 Greek (models 42G) 41A5263 Greek/US (models 42G) 41A5264 Hebrew (models 42G) 41A5265 Hungarian (models 42G) 41A5266 Iceland (models 42G) 41A5267 Italian 141 (models 42G) 41A5268 Norwegian (models 42G) 41A5272 Polish (models 42G) 41A5273...
  • Page 188 HU (models 22G 23G 42G) 42Y4209 PO (models 22G 23G 42G) 42Y4210 GK (models 22G 23G 42G) 42Y4211 SL (models 22G 23G 42G) 42Y4212 Taiwan - TC (models 22V) 42T8695 Multilingual 1 (models 22G 23G 42G) 42Y4427 Lenovo 3000 J Series...

  • Page 189: Machine Type 7397

    7396 Windows XP Pro Recovery CDs FRU# Tier RoHS? Multilingual 2 (models 22G 23G 42G) 42Y4428 7396 Corel Education CDs FRU# Tier RoHS? US (models 21M 21A 21Q 21T 21H 25H 41M) 41X0440 Machine Type 7397 Item 7397 FRUs FRU# Tier RoHS? Heat Sink/RM Kit, Intel Prescott, Cedar Mill, Smithfield, Presler (all...
  • Page 190 FRU# Tier RoHS? US English (models 23G) 41A4961 Arabic (models 23G) 41A4962 Arabic/French (models 23G) 41A4963 Belgian/French (models 23G) 41A4964 Belgian/UK (models 23G) 41A4965 Bulgarian (models 23G) 41A4967 Czech (models 23G) 41A4969 Danish (models 23G) 41A4970 Lenovo 3000 J Series...
  • Page 191 7397 Keyboards (USB Productivity) FRU# Tier RoHS? Dutch (models 23G) 41A4971 French (models 23G) 41A4972 German (models 23G) 41A4975 Greek (models 23G) 41A4976 Hebrew (models 23G) 41A4977 Hungarian (models 23G) 41A4978 Iceland (models 23G) 41A4979 Italian (models 23G) 41A4980 Japanese (models 21J 41J) 41A4981 Norwegian (models 23G) 41A4984...
  • Page 192 42Y4211 SL (models 23G) 42Y4212 Japanese (models 21J 22J 41J 42J) 42T8681 Multilingual 1 (models 23G) 42Y4427 Multilingual 2 (models 23G) 42Y4428 7397 Corel Education CDs FRU# Tier RoHS? JP (models 21J 22J 41J 42J) 41X0484 Lenovo 3000 J Series...

  • Page 193: Machine Type 7398

    Machine Type 7398 Item 7398 FRUs FRU# Tier RoHS? Heat Sink/RM Kit, Intel Prescott, Cedar Mill, Smithfield, Presler (all 41N8261 models) Microprocessor, Intel 925 (models 41M 42V) 41X2413 Microprocessor, CONROE E6300 1066/1860MHZ-2M (models 91B 91H 92B 41X2495 92H) DVD Recordable - Multi Burner Plus -DVD RAM VIII (models41M 42V 41N3343 91B 91H 92B 92H) DVD Recordable - Multi Burner Plus -DVD RAM VIII (models41M 42V...
  • Page 194 7398 Power Cords FRU# Tier RoHS? Power Cord (Australia, New Zealand) (models 41M) 39M5102 Power Cord (Hong Kong) (models 91B 91H 92B 92H) 39M5151 Power Cord (Taiwan) (models 42V) 39M5246 Power Cord (South Africa) (models 41M) 39M5143 Lenovo 3000 J Series...
  • Page 195 7398 Windows XP Home Recovery CDs FRU# Tier RoHS? US/UK/AP/TH (models 91H) 42Y3480 Hong Kong - TC (models 91B) 7398 Windows XP Pro Recovery CDs FRU# Tier RoHS? US/UK/AP/TH (models 41M 92H) 42Y3466 Taiwan - TC (models 42V) 42T8695 Hong Kong - TC (models 82B) 7398 Corel Education CDs FRU# Tier...
  • Page 196 Lenovo 3000 J Series...

  • Page 197: Chapter 11. Additional Service Information

    2. Lenovo Customer Support Center 3. Levels 1 and 2 Support To update (flash) the BIOS, see “Flash update procedures.” Flash update procedures This section details how to flash (update) the BIOS. © Lenovo 2006. Portions © IBM Corp. 2005, 2006.

  • Page 198: Updating (Flashing) Bios From A Diskette

    Updating (flashing) BIOS from a diskette 1. Insert a system program update (flash) diskette into the diskette drive. system program updates are available at http://www.lenovo.com/support on the World Wide Web. 2. Turn on the computer. If it is already on, you must turn it off and back on. The update begins.

  • Page 199: Power Management

    Power management Power management reduces the power consumption of certain components of the computer such as the system power supply, processor, hard disk drives, and some monitors. Automatic configuration and power interface (ACPI) BIOS Being an ACPI BIOS system, the operating system is allowed to control the power management features of the computer and the setting for Advanced Power Management (APM) BIOS mode is ignored.

  • Page 200: Recovering Software

    The set of Product Recovery discs will enable the contents of the hard disk to be restored to the same state as when the computer was originally shipped from the factory. For more information on recovering factory-installed software, refer to “Recovering software” in the User Guide. Lenovo 3000 J Series...

  • Page 201: Appendix. Notices

    Web sites. The materials at those Web sites are not part of the materials for this Lenovo product, and use of those Web sites is at your own risk.

  • Page 202: Television Output Notice

    Macrovision Corporation. Reverse engineering or disassembly is prohibited. Trademarks The following terms are trademarks of Lenovo in the United States, other countries, or both: Lenovo Lenovo logo...
  • Page 204 Part Number: 41X8137 Printed in USA (1P) P/N: 41X8137...

This manual is also suitable for:

3000 j 73883000 j 73913000 j 73923000 j 73933000 j 73943000 j 7395 ... Show all

Table of Contents