Removing The Interposer Board; Prerequisites; Procedure - Dell Embedded Box PC 5000 Service Manual

Removing the interposer
board
WARNING: Before working inside your Embedded Box PC, read the
safety information that shipped with your Embedded Box PC and
follow the steps in
After working inside your Embedded Box PC, follow the steps in
working inside your Embedded Box
see the Regulatory Compliance home page at
regulatory_compliance.

Prerequisites

1 Follow step 1 to step 6 in
2 Remove the
3 Remove the

Procedure

1 Remove the screws that secure the interposer board to the solid-state
drive card bracket.
32
Before working inside your Embedded Box
"Removing the back
drives from the hard-drive
solid-state drive from
PC. For more safety best practices,
www.dell.com/
cover".
cage.
bracket.
PC.
After