Removing The Wlan Card; Prerequisites; Procedure - Dell Embedded Box PC 5000 Service Manual

Removing the WLAN card

WARNING: Before working inside your Embedded Box PC, read the
safety information that shipped with your Embedded Box PC and
follow the steps in
After working inside your Embedded Box PC, follow the steps in
working inside your Embedded Box
see the Regulatory Compliance home page at
regulatory_compliance.

Prerequisites

1 Follow step 1 to step 6 in
2 Remove the

Procedure

1 Disconnect the antenna cables connected to the WLAN card.
2 Remove the screws that secure the WLAN-card bracket to the system
board.
3 Remove the WLAN-card bracket from the WLAN card.
56
Before working inside your Embedded Box
"Removing the back
PCI/PCIe card (if installed).
PC. For more safety best practices,
www.dell.com/
cover".
PC.
After