Removing the riser card
WARNING: Before working inside your Embedded Box PC, read the
safety information that shipped with your Embedded Box PC and
follow the steps in
After working inside your Embedded Box PC, follow the steps in
working inside your Embedded Box
see the Regulatory Compliance home page at
regulatory_compliance.
Prerequisites
1
Follow step 1 to step 6 in
2
Remove the
Procedure
1
Remove the screws that secure the riser-card assembly to the chassis.
Before working inside your Embedded Box
"Removing the back
PCI/PCIe card
(if installed).
PC. For more safety best practices,
www.dell.com/
cover".
PC.
After
91