Chemstation Views - Agilent Technologies 6100 Series LC/MS Quick Start Manual

ChemStation Views

The LC/MS ChemStation software consists of several views. Click one of the
view buttons in the lower left corner of the screen, or from the View menu, to
change to a different view.
Method and Run Control View Allows you to set up methods and adjust
instrument parameters to inject samples and acquire data one sample at a
time or in automated sequences. See the next page for more information.
Data Analysis View Allows you to perform various data evaluation tasks on
chromatograms and spectra, such as integration, quantitation, checking peak
purity, deconvolution, and report generation. See
Report Layout View Allows you to design custom report templates to use with
the data generated by your ChemStation. See
Verification (OQ/PV) View For use by Agilent service engineers to determine
if your system is operating in a predictable manner. This view is useful to
show Good Laboratory Practice (GLP) compliance, which some government
agencies can require. See
Diagnosis View Allows you to run tests to diagnose instrument problems and
access information on how to resolve these problems. The early maintenance
feedback (EMF) feature can notify you when it is time to perform system
maintenance before a problem occurs. See
MSD Tune View In this view, you can calibrate your LC/MS automatically. You
can also set MS parameters manually for specific types of molecules. See
page 17
Agilent 6100 Series LC/MS System Quick Start Guide
page 14
for more information.
page 9
page 12
for more information.
page 16 for more information.
ChemStation Views
LC Cabling
for more information.
for more information.
5