How To Switch The System Frequency - Panasonic DVCPRO HD AJ-HD1800P Operating Instructions Manual

Setup menus
<How to switch the system frequency>
Follow the steps below to switch the system frequency [59/60 Hz, 50 Hz, 23/24 Hz, 25 Hz (HD) or 25 Hz (SD), 50 Hz(HD), 50
Hz(SD)].
1
Following the procedure for the <SETUP MENU/
SYSTEM MENU> (page 62) to change the system
menu item No.25 (SYSTEM FREQ) setting.
2
Press (SET) to enter the setting, and after the
F5
function menu shown on the time code display area has
been cleared, the following message appears.
SHIFT F1 F2
3
To make the setting entered in step
button while holding down the
The system is restarted, and the VTR starts operating in
the selected mode.
<Selecting the recording/playback format and sync signals which support the operation mode>
No.25
Format enabling
SYSTEM
recording
FREQ
1080/59.94i (HD_LP)
59/60 720/59.94p (HD_LP)
720/60.00p (HD_LP)
1080/50i (HD_LP)
50i/25P
720/50p (HD_LP)
23/24 None
25 (HD) None
25 (SD) None
50 (HD) None
50 (SD) None
112
(continued)
F3 F4 F5 F6
2
valid, press the
button.
ENT
Format enabling playback
1080/59.94i (HD_LP, HD_SP)
1080/60i (HD_LP, HD_SP)
720/59.94p(HD_LP, HD_SP)
720/60.00p (HD_LP, HD_SP)
480/59.94i (50M, 25M, DV, DVCAM)
1080/50i (HD_LP, HD_SP)
720/50p (HD_LP)
576/50i (50M, 25M, DV, DVCAM)
576/25p over 50i (50M, 25M, DV)
1080/23.98p over 59.94i (HD_LP)
720/23.98p over 59.94p (HD_LP/HD_SP)
720/24p over 60.00p (HD_LP/HD_SP)
480/23.98p over 59.94i [2:3 mode]
480/23.98p over 59.94i [2:3:3:2 advance mode]
720/25p over 60p
720/24p over 60p
720/25p over 60p
720/50p over 60p
720/50p over 60p
4
To cancel the setting entered in step 2, press the
button while holding down the
The above message is cleared, and after the changed
setting has been restored to the original system menu
No.25 (SYSTEM FREQ) setting, operation returns to the
SYSTEM menu operation screen.
<Note>
If the system menu No.25 (SYSTEM FREQ) setting has
been changed while a cassette is inserted in the VTR, the
cassette is automatically ejected.
The same procedure as above is also followed when the
system menu No.25 (SYSTEM FREQ) setting has been
changed by loading the data from an SD memory card in
accordance with the <CARD> procedure (page 71).
F Note that even if the change being made to the system menu
item No. 25 setting is cancelled, other system menu items
affected by the change will be updated, as will the
associated file names.
button.
F
Sync signals
HD_REF (59.94Hz, 60Hz)
SD_REF (59.94Hz)
The setting selected for setup menu
item No.031 (OUT REF) applies.
HD_REF (50Hz)
SD_REF (50Hz)
The setting selected for setup menu
item No.031 (OUT REF) applies.
HD_REF (47.96Hz, 48Hz)
HD_REF (50Hz)
SD_REF (50Hz)
The setting selected for setup menu
item No.031 (OUT REF) applies.
SD_REF (50Hz)
HD_REF (50Hz)
SD_REF (50Hz)
The setting selected for setup menu
item No.031 (OUT REF) applies.
SD_REF (50Hz)
C