Panasonic DVCPRO HD AJ-HD1800P Operating Instructions Manual page 103

Setup menus
<AUDIO> (continued)
No./Item Description of setting
709 For selecting the CUE output reference level.
0000 4dB
CUE OUT LV
0001 0dB
0002 -3dB
0003 -20dB
710 For selecting the audio monitor output (Lch)
reference level.
MONIL OUT LV
0000 4dB
0001 0dB
0002 -3dB
0003 -20dB
711 For selecting the audio monitor output (Rch)
reference level.
MONIR OUT
0000 4dB
LV
0001 0dB
0002 -3dB
0003 -20dB
712 For selecting whether the volume of audio
monitor output is interlocked to the volume
adjustment knob or not.
MONI OUT
0000 UNITY
The signals are output at a fixed level.
0001 VAR
The signal output is coupled with the head-
phones volume control.
1,2 For selecting the CH1 input signal.
713*
0000 INT SG
CH1 IN SEL
The internal signal is selected.
0001 DIGI
Digital input signals are selected.
0002 ANA
Analog input signals are selected.
<Note>
When DIGI has been selected, whether serial or
AES is selected for the input is determined by the
setting selected for setup menu item No.721 (D IN
SEL 12).
For selecting the CH2 input signal.
1,2
714*
0000 INT SG
CH2 IN SEL
The internal signal is selected.
0001 DIGI
Digital input signals are selected.
0002 ANA
Analog input signals are selected.
<Note>
When DIGI has been selected, whether serial or
AES is selected for the input is determined by the
setting selected for setup menu item No.721 (D IN
SEL 12).
2 For selecting the CH3 input signal.
715*
0000 INT SG
CH3 IN SEL
The internal signal is selected.
0001 DIGI
Digital input signals are selected.
0002 ANA
Analog input signals are selected.
<Note>
When DIGI has been selected, whether serial or
AES is selected for the input is determined by the
setting selected for setup menu item No.722 (D IN
SEL 34).
(continued)
No./Item Description of setting
1,2 For selecting the CH4 input signal.
716*
0000 INT SG
CH4 IN SEL
The internal signal is selected.
0001 DIGI
Digital input signals are selected.
0002 ANA
Analog input signals are selected.
<Note>
When DIGI has been selected, whether serial or
AES is selected for the input is determined by the
setting selected for setup menu item No.722 (D IN
SEL 34).
1,2 For selecting the CH5 input signal.
717*
0000 INT SG
CH5 IN SEL
The internal signal is selected.
0001 DIGI
Digital input signals are selected.
0002 ANA
Analog input signals are selected. (CH1 input)
<Note>
When DIGI has been selected, whether serial or
AES is selected for the input is determined by the
setting selected for setup menu item No.723 (D IN
SEL 56).
1,2 For selecting the CH6 input signal.
718*
0000 INT SG
CH6 IN SEL
The internal signal is selected.
0001 DIGI
Digital input signals are selected.
0002 ANA
Analog input signals are selected. (CH2 input)
<Note>
When DIGI has been selected, whether serial or
AES is selected for the input is determined by the
setting selected for setup menu item No.723 (D IN
SEL 56).
1,2 For selecting the CH7 input signal.
719*
0000 INT SG
CH7 IN SEL
The internal signal is selected.
0001 DIGI
Digital input signals are selected.
0002 ANA
Analog input signals are selected. (CH3 input)
<Note>
When DIGI has been selected, whether serial or
AES is selected for the input is determined by the
setting selected for setup menu item No.724 (D IN
SEL 78).
*1 When the 23/24 Hz mode, 25 Hz (HD, SD) mode, or the 50 Hz
(HD, SD) mode is selected in System Menu No. 25 (SYSTEM
FREQ), this item is not displayed.
*2 When 1394 is selected in System Menu No. 600 (VIDEO IN
SEL), it is the 1394 input regardless of the selection in this
menu.
The underlining (__) denotes the factory setting mode.
103