Table of Contents
Advertisement
Setup menus
<How to switch the system frequency>
Follow the steps below to switch the system frequency (59/60 Hz, 50 Hz, 23/24 Hz, 25 Hz (HD) or 25 Hz(SD)).
1
Following
the
procedure
MENU/SYSTEM MENU> (page 60) to change the
system menu item No.25 (SYSTEM FREQ) setting.
2
Press
(SET) to enter the setting, and after the
F5
function menu shown on the time code display area
> has been cleared, the following message
appears.
SHIFT
F1
F2
3
To make the setting entered in step 2 valid, press
the
button while holding down the
ENT
The system is restarted, and the VTR starts
operating in the selected mode.
<Selecting the recording/playback format and sync signals which support the
operation mode>
No.25
SYSTEM
Format enabling recording
FREQ
1080/59.94i (HD_LP)
1080/60.00i (HD_LP)
50/60
720/59.94p (HD_LP)
720/60.00p (HD_LP)
50
1080/50i (HD_LP)
23/24
None
25 (HD)
None
25 (SD)
None
for
the
<SETUP
F3
F4
F5
F6
button.
F
Format enabling playback
1080/59.94i (HD_LP, HD_SP)
1080/60i (HD_LP, HD_SP)
720/59.94p (HD_LP, HD_SP)
720/60.00p (HD_LP, HD_SP)
480/59.94p (480p)
480/59.94i (422, 411, DV, DVCAM)
1080/50i (HD_LP, HD_SP)
576/50i (422, 411, DV, DVCAM)
576/25p over 50i (422, 411, DV)
720/23.98p over 59.94p (HD_SP/HD_SP)
720/24p over 60.00p (HD_SP/HD_SP)
480/23.98p over 59.94i [2:3 mode]
480/23.98p over 59.94i [2:3:3:2 advance mode]
720/25p over 60p
720/25p over 60p
4
To cancel the setting entered in step 2, press the
button while holding down the
C
The above message is cleared, and after the
changed setting has been restored to the original
system menu No.25 (SYSTEM FREQ) setting,
operation returns to the SYSTEM menu operation
screen.
<Note>
If the system menu No.25 (SYSTEM FREQ) setting
has been changed while a cassette is inserted in the
VTR, the cassette is automatically ejected.
The same procedure as above is also followed when
the system menu No.25 (SYSTEM FREQ) setting has
been changed by loading the data from an IC card in
accordance with the <CARD> procedure (page 69).
Note that even if the change being made to the system
menu item No. 25 setting is cancelled, other system
menu items affected by the change will be updated, as
will the associated file names.
HD_REF (59.94Hz, 60Hz)
SD_REF (59.94Hz)
The setting selected for setup menu
item No.031 (OUT REF) applies.
HD_REF (50Hz)
SD_REF (50Hz)
The setting selected for setup menu
item No.031 (OUT REF) applies.
HD_REF (47.96Hz, 48Hz)
HD_REF (50Hz)
SD_REF (50Hz)
The setting selected for setup menu
item No.031 (OUT REF) applies.
SD_REF (50Hz)
button.
F
Sync signals
105
Advertisement
Table of Contents
