Panasonic DVCPRO HD AJ-HD1800P Operating Instructions Manual page 99

Setup menus
<VIDEO> (continued)
No./Item Description of setting
656 For adjusting the black level of the HD SDI
output.
BK LVL
50 -10.0%
*UP
(HD)
: :
150 0.0%
: :
250 +10.0%
<Note>
This setting takes effect when "CMPNT" has been
selected as the setup menu item No.650 setting.
658 For adjusting the Y level of SD SDI output and
analog composite output
(j ∞ to 0 dB to i3 dB)
*DW
Y LVL (SD)
0000 0.0%
: :
1000 100.0%
: :
1413 141.3%
<Note>
This setting takes effect when "CMPNT" has been
selected as the setup menu item No.650 setting.
659 For adjusting the PB level of SD SDI output and
analog composite output
(j ∞ to 0 dB to i3 dB)
Pb LVL
*DW
(SD)
0000 0.0%
: :
1000 100.0%
: :
1413 141.3%
<Note>
This setting takes effect when "CMPNT" has been
selected as the setup menu item No.650 setting.
660 For adjusting the PR level of SD SDI output and
analog composite output
(j ∞ to 0 dB to i3 dB)
Pr LVL
0000 0.0%
*DW
(SD)
: :
1000 100.0%
: :
1413 141.3%
<Note>
This setting takes effect when "CMPNT" has been
selected as the setup menu item No.650 setting.
661 For adjusting the black level of SD SDI output
and analog composite output
BK LVL
50 -10.0%
*DW
(SD)
: :
150 0.0%
: :
250 +10.0%
<Note>
This setting takes effect when "CMPNT" has been
selected as the setup menu item No.650 setting.
662 For adjusting the black level of SD SDI output
and analog composite output
(j ∞ to 0 dB to i6 dB)
V LEVEL
0000 0.0%
: :
1000 100.0%
: :
2000 200.0%
<Note>
This setting takes effect when "CMPST" has been
selected as the setup menu item No.650 setting.
(continued)
No./Item Description of setting
663 For adjusting the chroma level of HD SDI, SD
SDI, and analog composite output
(j ∞ to 0 dB to i3 dB)
C LEVEL
0000 0.0%
: :
1000 100.0%
: :
1413 141.3%
<Note>
This setting takes effect when "CMPST" has been
selected as the setup menu item No.650 setting.
664 For adjusting the chroma phase of HD SDI, SD
SDI, and analog composite output
( Approx. j 30x to i30x)
HUE
(AJ-HD1800P)
j31.0
0000
: :
C PHASE
0062 0.0
(AJ-HD1800E)
: :
0124 31.0
<Note>
This setting takes effect when "CMPST" has
been selected as the setup menu item No.650
setting.
When the 50 Hz mode, 25 Hz (HD/SD) mode, or
50 Hz (HD/SD) mode is selected in System
Menu No. 25 (SYSTEM FREQ), it is impossible
to adjust the HD SDI output.
The SD SDI and analog composite output can be
adjusted only when a tape in SD format is played
back, or cross conversion is set in Menu No. 630
(1080i > HD OUT) and No. 631 (720p > HD
OUT).
665 For adjusting the setup (black) level of the HD
SDI output, SD SDI output and VIDEO output.
(j10% to i10%)
SETUP LVL
50 -10.0%
(AJ-HD1800P)
: :
150 0.0%
BK LVL
: :
(AJ-HD1800E)
i10.0%
250
<Note>
This setting takes effect when "CMPST" has been
selected as the setup menu item No.650 setting.
670 For adjusting the brightness of the LCD monitor
on the front panel.
0000 -7
BRIGHTNESS
: :
0007 0
: :
0014 7
671 For adjusting the color density of the LCD
monitor on the front panel
0000 -7
COLOR
: :
LEVEL
0007 0
: :
0014 7
*UP: With HD output (HD tape playback or up-converted output)
*DW: With SD output (SD tape playback or down-converted output)
The underlining (__) denotes the factory setting mode.
99