Table of Contents
Advertisement
INPUT Signal Selector (AG-7350 only)
Used to select video input signal to be recorded.
S-VIDEO: To record video signat through the S-VIDEO IN
Connector.
LINE:
To record video signal through the VIDEO IN
Connector.
SYNC Selector
Select the synchronizing signal.
EXT:
To synchronize to the external composite sync
Signal transmitted through the EXIT SYNC IN
Connector during playback or recording.
NORM:
To synchronize to the video input signa! transmitted
from the VIDEO IN Connector. (If there is no video
input signal, the "INT" mode will be selected.)
INT:
To synchronize to the internal oscillator built in this
unit. (During recording, it will be automatically
synchronized to the video input signal.)
m When setting to "EXT", be sure to input an external com-
posite sync signal.
TV SYSTEM Selector
Used to select the 3 VHS system.
PAL:
To playback or record by PAL system.
CCIR:
To playback or record by CCIR system. (S-VHS
recording can not be made.)
NTSC
4.43:
To playback tapes recorded by NTSC system.
(Recording cannot be performed.)
@ PAL and CCIR systems can not be distinguished automat-
ically.
a If REC and PLAY Buttons are pressed simultaneously when
this selector is set to "NTSC 4.43", the unit will aulomatcaly
go into playback mode.
S-VIGE:
|
LINE
"
oD
ec =
—
®
77)
<
Oo
=
rE
ie]
INPUT
AG-7350
AG-7150
EXT
EXT
"1
"at
INT
INT =|
'
SYNC
SYNC
PAL
'CCIR
NTSC
443
TY SYSTEM
13
Advertisement
Table of Contents
