Connections
Example of connections performed for
one VTR
Set the REMOTE LED
off status (LOCAL mode).
Audio monitor outputs
Analog audio outputs
Analog audio inputs
on the front panel to the
SD SDI input ACTIVE THRU
SD SDI input
(audio, video)
HD SDI input
(audio, video)
HD SDI output
(ACTIVE THRU)
SD SDI output
HD SDI outputs
Digital audio inputs
Digital audio outputs
HD/SD reference inputs
(loop-through output)
Video monitor output
(3 composite output lines)
Example of connections performed for
two VTRs (deck-to-deck)
Source side:
Press the "9P 1394" REMOTE button on the front panel
for 2 or more seconds to set the VTR to the REMOTE
status. (The LED lights.)
Recorder side:
Set the REMOTE LED
status (LOCAL mode).
SD reference signal generator
To audio monitor
component
Source side
To video monitor
component
To audio monitor
component
Recorder side
To video monitor
component
on the front panel to the off
HD SDI signal
REMOTE
75h
IN/OUT
termination
OFF
Remote
signal (9P)
REMOTE
75h
IN/OUT
termination
ON
21