Panasonic DVCPRO HD AJ-HD1800P Operating Instructions Manual page 127

Error messages
_Displaying the hour-meter information
Turn the ADJ dial to move the cursor (¢), and the description
for the item where the cursor is located is shown as a
superimposed display.
No./Item
H00 Displays in 1-hour increments the time during
which power has been supplied.
OPERATION
H01 Displays in 1-hour increments the amount of time
during which the drum has rotated.
DRUM RUN
H02 Displays in 1-hour increments the amount of time
during which the tape has been running in the FF,
REW, PLAY, SEARCH (JOG, SLOW and SHTL),
TAPE RUN
REC and EDIT modes (but not in the JOG, SLOW,
SHTL or STILL mode).
H03 Displays in 1-time increments the number of times
the tape has been threaded (loaded) and
unthreaded (unloaded).
THREADING
H04 Displays in 1-time increments the number of front
loading operations.
F LOADING
H05 Displays in 1-hour increments the amount of time
during which the LCD monitor has lighted.
LCD ON
H11
Displays in 1-hour increments the amount of time
during which the drum has rotated.
(Can be reset.)
DRUM RUNr
H12 Displays in 1-hour increments the amount of time
during which the tape has been running in the FF,
REW, PLAY, SEARCH (JOG, SLOW and SHTL),
TAPE RUNr
REC and EDIT modes (but not in the JOG, SLOW,
SHTL or STILL mode). (Can be reset.)
H13 Displays in 1-time increments the number of times
the tape has been threaded (loaded) and
unthreaded (unloaded). (Can be reset.)
THREADINGr
H14
Displays in 1-time increments the number of front
loading operations.
(Can be reset.)
F LOADINGr
H15 Displays in 1-hour increments the amount of time
during which the LCD monitor has lighted. (Can be
reset.)
LCD ON r
H30 Displays the number of times the power has been
turned on.
POWER ON
<Note>
The resettable table hour-meter information items will be
reset by your dealer when maintenance or other work is
performed.
(continued)
Description
If "T&S&M" has been selected as the setup menu item
No.006 (DISPLAY SEL) setting, a message appears in the
mode display area whenever a warning or error has
occurred. When a multiple number of errors have occurred,
the one with the highest priority is displayed.
Priority Display and description
Error messages (see error message table):
When any problem arises with the VTR's
Higher
operation, the AUTO OFF lamp lights, and an
error message is displayed.
INT SG:
If, when "INT SG" has been selected as the audio
input setting by
menu or by the <AUDIO> or <AUDIO SHIFT1>
menu, and the EDIT button is pressed, this
message is displayed for the first two seconds
when editing is started. In the same way, it is
displayed for the first two seconds when recording
is started.
NO INPUT:
If, when input signals (but not analog audio
signals) are not supplied to the input connector
F1
selected by
or by the <AUDIO> or <AUDIO SHIFT1> menu,
the EDIT button is pressed, this message is
displayed for the first two seconds when editing is
started. In the same way, it is displayed for the
first two seconds when recording is started.
Warning messages
(see warning message table):
When a warning occurs in this VTR, the warning
lamp lights, and a warning message is displayed.
When a multiple number of warnings have
Lower
occurred, the one with the highest priority is
displayed.
_Display of UMID information
In the EE mode, the indication is displayed when UMID
information is available in the input signal. When a tape is
played back, the indication is displayed if the UMID
information is available on the tape. If there is no UMID
information, [NO-INFO] is displayed.
Indication
MATNO Material number
COPY Instance number (number of times for copying)
OWNR Country name, Organization name, User name
POS Elevation, Latitude, Longitude, Reception level from
the GPS satellite at the time of recording
HOLD: It is impossible to receive signals from the
GPS satellite.
2D: The number of satellites is a few. The
accuracy
insufficient.
3D: Signals from the GPS satellite are good
(strong).
DATE Date
TIME UTC (Coordinated Universal Time)
F1 (VID IN) on the <VIDEO>
(VID IN) on the <VIDEO> menu
Contents
of elevation information is
127