File - Panasonic DVCPRO HD AJ-HD1800P Operating Instructions Manual

Function menus
<FILE>
The current setting information, including the SETUP menu
contents, can be provided with titles and either saved in or
loaded from the backup memory in one of 4 variations.
When (FILE) is pressed while the
F1
down on the <MENU> screen, the following function menu is
displayed.
Memory selection cursor
Memory name
SHIFT F1 F2
File title (VTR)
File number
File number
(VTR)
(VTR)
This VTR comes with VTR MEMORY
current settings (*) and VTR MEMORY
storing these settings as a backup.
Each VTR MEMORY can be provided with a title.
Data can be saved and loaded and titles can be copied
between VTR MEMORY
4 .
The file locking facility for preventing data from being
overwritten can be engaged for VTR MEMORY
* The term "settings" used here refers to all the settings
on the setup menus excluding the SYSTEM menu, what
has been registered in the PF1 and PF2 menu items,
and the contents of some of the function buttons.
Name of memory Initial title (up to 8
area characters)
VTR MEMORY C CURRENT
VTR MEMORY 1
VTR MEMORY 2
VTR MEMORY 3
VTR MEMORY 4
64
(continued)
F button is held
F3 F4 F5 F6
File title (VTR)
File status (VTR)
for storing the
C
1 to 4 for
and VTR MEMORY
C 1
1
USER1
USER2
USER3
USER4
Settings
1
Selecting the memory target
Press the
SHIFT
The operation target switches alternately between VTR
MEMORY
C
2
Selecting the operation file in the selected memory
The number of the currently selected file is highlighted
on the display.
highlighting moves to the left or right, enabling operation
files to be selected.
3
Transferring files between memories
After selecting the operation file, press
The contents of files selected in VTR MEMORY
can be transferred to VTR MEMORY
4
When is selected and
F
factory setting mode is established.
Alternatively, when
of a file in VTR MEMORY
selected in VTR MEMORY
(The titles are also transferred at the same time.)
4
Editing the title of the selected file
Press the ADJ dial after selecting the operation file.
The first digit of the title display area is highlighted, and
the file title can be edited.
To input a number, press the number keys.
To input letters, tap the numbers keys until the letter
to be input appears while holding down the
to
button.
More than one letter is allocated to each number key.
Turn the ADJ dial to move from one digit to the next in
to .
4
the title display area.
To enter the title, press the ADJ dial again.
<Notes>
When the display screen has been switched or the
button has been pressed during title editing, the
C
editing enable status is canceled, and the setting
becomes invalid.
A space can be input by pressing the
button.
3
button.
and VTR MEMORY to
1
When the ADJ dial is turned, the
F2
(LOAD) is pressed, the
F2
(SAVE) is pressed, the contents
F3
can be transferred to a file
C
to .
1 4
.
4
(LOAD).
to
1
.
C
F
button and
F