Panasonic DVCPRO HD AJ-HD1800P Operating Instructions Manual page 43

Function menus
<HOME> (continued)
Status display 2
Indicator Description of setting
This lights when the SCH phase of
the SDREF signal is within the
SCH
prescribed range.
This lights when color framing is
CF
locked.
This lights during recording or
playback in the drop frame mode.
<Note>
If the time code data could not be
DF
read properly ("T¢R" is displayed),
the display of the previous status is
held.
Status display 3
Indicator Description of setting
For EE mode, this indicates that UMID information is
available in input information.
UM
When a tape is played back, this indicates that UMID
information is available on the tape.
When [SQUEEZ] is selected in Setup Menu No. 620
(DOWNCON MODE) and down convert output is set
to wide screen, this indicates that wide screen
WD
information is recorded on the tape for SD tape
playback.
This indicates that the gamma function is selected in
GM
Setup Menu No. 693 (GAMMA SEL).
This is indicated when the function button
(VERMEM) of <HOME SHIFT> is turned [ON].
VM
Whenever VM is displayed, the variable memory is
operable. (For details, refer to [Variable memory
function].)
(continued)
F6
Operation mode (speed) display
This indicates the current operation mode (including the
speed display).
Display
EJECT Eject mode
STANDBY OFF Standby OFF mode
T.RELEASE Tension release mode
STOP Stop mode
PREROLL Preroll mode
PLAY Playback mode
Special playback (playback phase adjustment)
PLAY +
mode (FWD direction)
Special playback (playback phase adjustment)
PLAY j
mode (REV direction)
REC Recording mode
JOG
Jog mode
REV/STILL/FWD
VAR (speed)
Slow mode
[j4.9 to i4.9]
SHTL (speed)
Shuttle mode
[j32.0 to i32.0]
FF Fast forwarding mode
REW Rewinding mode
EDIT Editing mode
AUTO EDIT Automatic editing mode
PREVIEW Preview mode
REVIEW Review mode
When function F6 (VARMEM) on <HOME SHIFT> is "ON"
DSPD (speed)
Initial speed setting of variable memory
[j1.0 to i2.0]
DSMP (speed) Playback speed memory mode of variable
[j1.0 to i2.0]
memory
DPLY (speed)
Playback mode of variable memory
[j1.0 to i2.0]
DPRV (speed)
Preview mode of variable memory editing
[j1.0 to i2.0]
DEDT (speed)
Execution mode of variable memory editing
[j1.0 to i2.0]
Operation mode
43