Panasonic DVCPRO HD AJ-HD1800P Operating Instructions Manual page 100

Setup menus
<VIDEO> (continued)
No./Item Description of setting
672 For adjusting the contrast of the LCD monitor
on the front panel.
0000 -7
CONTRAST
: :
0007 0
: :
0014 7
673 For adjusting the backlight
0000 NORMAL
Normal mode
BACKLIGHT
0001 HIGH
The backlight is brighter than NORMAL.
2 This function clips the signals below the
676*
pedestal level for SD SDI OUT and composite
OUT Y (luminance) signals.
BLK CLIP
0000 OFF
The signals are not clipped.
0001 ON
The signals are clipped.
*1 For selecting ON or OFF for the closed caption
680
signals in the first field.
0000 BLANK
CC (F1)
The signals are forcibly blanked.
*DW
BLANK
0001 THRU
The signals are not blanked
1 For selecting ON or OFF for the closed caption
681*
signals in the second field.
0000 BLANK
CC (F2)
The signals are forcibly blanked.
*DW
BLANK
0001 THRU
The signals are not blanked.
682 This selects the composite output signal in HD
mode.
0000 THRU
VO SETUP
The signal is output with no setup added.
*UP
(HD)
0001 ADD22L
The signal is output from line 22 with a 7.5%
(This menu is
setup added.
not displayed
0002 ADD21L
for AJ-
The signal is output from line 21 with a 7.5%
HD1800E.)
setup added.
0001 ADD20L
The signal is output from line 20 with a 7.5%
setup added.
683 This selects the composite output signal in SD
mode.
0000 THRU
VO SETUP
The signal is output with no setup added.
*DW
(SD)
0001 ADD22L
The signal is output from line 22 with a 7.5%
(This menu is
setup added.
not displayed
0002 ADD21L
for AJ-
The signal is output from line 21 with a 7.5%
HD1800E.)
setup added.
0001 ADD20L
The signal is output from line 20 with a 7.5%
setup added.
684 For selecting whether EDH is superimposed on
SD SDI output
*DW
EDH (SD)
0000 OFF
EDH is not superimposed.
0001 ON
EDH is superimposed
100
(continued)
No./Item Description of setting
1 For selecting the operation mode for edge
685*
subcarrier reduction (ESR) in the playback
circuit.
ESR MODE
*DW
(SD)
0000 OFF
ESR is forcibly set to OFF
0001 AUTO
ESR is automatically set to ON or OFF in
accordance with the VTR operation
1 For selecting the cross color processing during
686*
playback.
CCR MODE
0000 OFF
*DW
(SD)
The cross color is output as is.
0001 ON
The cross color can be reduced
3 For selecting whether to superimpose the
687*
VIDEO INDEX signal on the SD SDI output
signal.
SDI INDEX 0
*DW
0000 OFF
The VIDEO INDEX signal is not superimposed
on the SD SDI output signal.
0001 ON
The VIDEO INDEX signal is superimposed on
the SD SDI output signal.
1 For selecting whether to record the closed
688*
caption signals which are superimposed on the
SD input signal.
CC REC
0000 OFF
The closed caption signals are not recorded on
the tape.
0001 ON
The closed caption signals are recorded on the
tape if they are superimposed on the SD input
signal. In this case, they are blanked, up-
converted and then recorded.
*1 When the 23/24 Hz mode, 25 Hz (HD, SD) mode, or 50 Hz
(HD, SD) mode is selected in System Menu No. 25 (SYSTEM
FREQ), this item is not displayed.
*2 When the 50 Hz mode, 25 Hz (HD, SD) mode, or 50 Hz (HD,
SD) mode is selected in System Menu No. 25 (SYSTEM
FREQ), this item is not displayed.
*3 When the 23/24 Hz mode, 25 Hz (HD) mode, or 50 Hz (HD)
mode is selected in System Menu No. 25 (SYSTEM FREQ),
this item is not displayed.
*UP: With HD output (HD tape playback or up-converted output)
*DW: With SD output (SD tape playback or down-converted output)
The underlining (__) denotes the factory setting mode.