Panasonic DVCPRO HD AJ-HD1800P Operating Instructions Manual page 48

Function menus
<HOME> (continued)
Function button/ Switching
item method
F1 Toggle
OUTPUT
F2 ___
___
F3 Toggle
2
TC/CTL*
F4 Press
1
TC CLR*
F i toggle
F5
CMP MD
F i toggle
F6
R INH
Toggle i ADJ
F1(SHIFT)
PREROL
F2(SHIFT) ___
___
F i toggle
F3(SHIFT)
OUTREF
F i toggle
F4(SHIFT)
CAPSTN
F5(SHIFT) ___
___
F6(SHIFT) Toggle
1
VARMEM*
1
When the 23/24 Hz mode, 25 Hz (HD, SD) mode, or the 50 Hz (HD, SD) mode is selected in System Menu No. 25 (SYSTEM
*
FREQ), this item is not displayed.
2
When the 23/24 Hz mode, 25 Hz (HD, SD) mode, or the 50 Hz (HD, SD) mode is selected in System Menu No. 25 (SYSTEM
*
FREQ), the CTL cannot be selected. The TC is selected when turning on the power.
The underlining (__) denotes the factory setting mode.
48
(continued)
Corresponding setup menu
Setting
TAPE No. 140
OUTPUT
EE
___ ___
TC ___
UB
CTL
RESET ___
NORMAL No. 689
COMP MODE
DARK
OFF No. 113
REC INH
ALL
PRE
NORM
V/CTL
0s --- 5s --- 30s No. 000
P-ROLL TIME
___ ___
AUTO No. 031
OUT REF
INPUT
HD_REF
SD_REF
E-AUTO
2F No. 109
CAP. LOCK
4F
___ ___
OFF ___
ON
item
For selecting the output signals.
<In the STOP mode>
TAPE: In the STOP mode, the signals played
back from the tape are output.
During
simultaneous
output.
*: Setup menu item No.302 (CONFI
EDIT) must be set.
EE: The input signals selected by the setup
menu items No.600 (VIDEO IN SEL)
and No.713 (CH1 IN SEL) to No.724 (D
IN SEL 78) settings are output.
___
For selecting the time counter display.
TC: The time code value is displayed.
UB: The user bits value is displayed.
CTL: The control signal (time data) is
displayed.
For resetting the time counter display.
If the F4 button is pressed while the control
signal (time data) is displayed on the time
counter, it is reset to zero.
Refer to the SETUP menu.
<Note>
When the 23/24 Hz mode, 25 Hz (HD, SD)
mode, or the 50 Hz (HD, SD) mode or the 50 Hz
mode is selected in Setup Menu No. 25
(SYSTEM FREQ), this item is not displayed.
Refer to the setup menu.
<Note>
The set ting can be changed from OFF to ALL
simply by operating the function button without
pressing the
Refer to the setup menu.
___
Refer to the setup menu.
Refer to the setup menu.
___
For selecting the variable memory mode.
OFF: The variable memory mode is not used.
ON: The status is established in which variable
memory playback or variable memory
editing is enabled.
Description of setting
recording or editing
playback signals
F
button.
(*),
are