System Menus - Panasonic DVCPRO HD AJ-HD1800P Operating Instructions Manual

System menus

No./Item Description of setting
05 For setting whether to perform the various
adjustments for the video output signals using this
VTR or using an external encoder remote controller.
ENCODER
0000 REMOTE
SEL
The various adjustments for the video output
signals are performed by an external encoder
remote controller.
0001 LOCAL
The various adjustments for the video output
signals are performed using this VTR.
0002 BOTH
The various adjustments for the video output
signals are performed using both this VTR and
an external encoder remote controller.
<Notes>
When an adjustment is made with the external
encoder remote controller, the new values are
reflected in the appropriate section of the Setup
Menu. The adjusted values are stored on the unit
approximately 5 seconds after making the
adjustment. To turn off the power after making
the adjustment with the external encoder remote
controller, wait approximately 5 seconds or more
after completion of the operation before turning
the power off.
For the IEEE 1394 digital output, settings are
disabled in this menu.
06 For selecting what is to be controlled when the
video output level is to be adjusted by an
external encoder remote controller.
V LEVEL
0000 HD
CTRL
The HD video output level can be adjusted.
0001 SD
The SD video output level can be adjusted.
0002 BOTH
Both the HD and SD video output levels can be
adjusted.
<Note>
When [CMPST] is selected in Setup Menu No.
650 (STYLE), [BOTH] is selected be default
regardless of the settings for this item.
The underlining (__) denotes the factory setting mode.
Video output signal adjustments
The control matrix for the adjustments is shown in the table
below.
Setting
05: 06: 653: Y LVL (HD)
ENCODER V LEVEL
654: Pb LVL (HD)
SEL CTRL
655: Pr LVL (HD)
656: BK LVL (HD)
REMOTE HD External encoder
remote controller
SD No adjustments
possible
BOTH External encoder
remote controller
LOCAL HD
SD This unit
BOTH
BOTH HD External encoder
remote controller/
this unit
SD
This unit
BOTH External encoder
remote controller/
This unit
80
Adjustment item
658: Y LVL (SD)
659: Pb LVL (SD)
660: Pr VL (SD)
661: BK LVL (SD)
No adjustments
possible
External encoder
remote controller
External encoder
remote controller
This unit
This unit
External encoder
remote controller/
this unit
External encoder
remote controller/
this unit
External encoder remote controller:
Only adjustments of the external encoder remote
controller are performed.
This unit：
Only adjustments of the setup menu items are performed.
External encoder remote controller/this unit：
Adjustments can be performed from both the external
encoder remote controller and setup menus.
<Note>
Use the AJ-ER50, an optional accessory, as the external
encoder remote controller. However, its VIDEO PHASE and
SYNC PHASE controls will not work.
When "CMPST" has been selected as the setup menu item
No.650 (STYLE) setting
Setting Adjustment item
05: 06: 662: V LEVEL
ENCODER V LEVEL 663: C LEVEL
SEL CTRL 664: HUE
665: SETUP LVL
REMOTE HD
External encoder
SD
remote controller
BOTH
LOCAL HD
SD This unit
BOTH
BOTH HD
External encoder
SD
remote controller/This
unit
BOTH
External encoder remote controller:
Only adjustments of the external encoder remote
controller are performed.
This unit:
Only adjustments of the setup menu items are performed.
External encoder remote controller/This unit:
Adjustments can be performed from both the external
encoder remote controller and setup menus.
<Note>
Use the MT-2000 (manufactured
recommended by Panasonic) as the external encoder
remote controller. However, its VIDEO PHASE, SYNC
PHASE and SC PHASE controls will not work.
by Musashi and