Bios Setup Default Settings - Siemens simatic ET 200SP User Manual

8.3.4

BIOS setup default settings

Documenting the device configuration
If you make changes to the default setting of the BIOS setup, enter these in the table below.
This will ensure that values you set will be readily available if hardware changes are made
later.
We recommend that you print out the table below and keep it in a safe place after you have
made your entries.
Note
The default settings in the BIOS setup depend on the ordered device configuration.
BIOS setup default settings
Menu
Main
Advanced > IDE Configura-
tion
Advanced > Video Configu-
ration
Advanced > CPU Related
setting
Advanced > AMD PBS Op-
tion
Security
Power
Boot
Boot > Boot Device Priority >
Normal Boot Menu
Boot > Boot Device Priority
CPU 1515SP PC
Manual, 12/2014, A5E32701806-AA
System parameters
System Time
System Date
SATA configure as
Serial ATA Port 0
UMA Sharing Memory Size
SVM Support
Internal LAN Controller
PXE Boot to INT_LAN
Supervisor Password
Set Supervisor Password
Wake on PME
Auto Wake on S5
Quick Boot
Quiet Boot
USB Boot
Normal
Advance
Boot Type Order
Hard Disk Drive
Default settings
hh:mm:ss
MM/TT/JJJJ
LEGACY IDE
SIMATIC IPC CFast 8/16
256 MB
Enabled
Auto
Disabled
Not installed
Inactive (no password as-
signed)
Enabled
Disabled
Enabled
Disabled
Disabled
Normal
Hard Disk Drive
USB
Others
SIMATIC IPC CFast 8/16
GByte
Functions
8.3 BIOS description
User settings
63