Starting Bios Setup - Siemens simatic ET 200SP User Manual

8.3.2

Starting BIOS setup

Start the setup program as follows:
1. Disconnect the device from the power supply and switch it on again (cold restart).
With the CPU 1515SP PC default settings, the following screen appears after the device
has been switched on:
Figure 8-1 BIOS setup
After completion of the startup test, you have the option of starting the SETUP program.
The following BIOS message appears:
Press F2 go to Setup Utility
Press F12 go to Boot Manager
2. Press the <F2> button while the message is on the screen.
CPU 1515SP PC
Manual, 12/2014, A5E32701806-AA
Functions
8.3 BIOS description
51