Siemens simatic ET 200SP User Manual page 16

Open controller
Hide thumbs Also See for simatic ET 200SP:
Table of Contents

Advertisement

Product overview
3.1 Properties
Properties
The CPU 1515SP PC is a PC-based automation device in the design of the ET 200SP. It is
used for control and visualization purposes. The supplied IPC DiagBase software provides
basic diagnostics functions and supports you in handling the BIOS.
The CPU 1515SP PC has the following technical properties:
● A removable CFast card with the following pre-installations is used as storage medium:
– Windows Embedded Standard 7 operating system
– S7 1500 software controller: CPU 1505S
– Optionally with HMI: WinCC Runtime Advanced V13 SP1
● Interfaces
– An interface for the exchangeable ET 200SP BusAdapters for connection of
– An interface for connecting devices using Industrial Ethernet (Gigabit Ethernet)
– 3 interfaces for USB devices
– A DVI-I interface for a monitor
– A sealable slot for the CFast card
– A slot for an SD/MMC card as additional optional drive
● Supply voltage 1L+ 24 V DC (SELV/PELV). The connection plug is included in the scope
of delivery.
● The CPU 1515SP PC is suitable for use in industrial environments:
– Compact design
– Fan-less operation
– High robustness
● The CPU 1515SP PC complies with IP 20 degree of protection and is intended for
installation in a control cabinet.
Hardware variants and ordering options
The following hardware variants are available for the CPU 1515SP PC:
● WES7 E 32-bit 2GB RAM, 8 GB CFast card
● WES7 P 64-bit 4GB RAM, 16 GB CFast card, suitable for Multitouch panels
The following order options are available:
● CPU 1515SP PC with preinstalled software controller
● CPU 1515SP PC + HMI (128PT, 512PT, 2040PT) with preinstalled software controller
and WinCC Runtime Advanced V13 SP1
16
PROFINET IO (2 ports)
CPU 1515SP PC
Manual, 12/2014, A5E32701806-AA

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents