Siemens simatic ET 200SP User Manual page 90

Technical data
10.4 Mechanical and climatic ambient conditions
Mechanical ambient conditions
The table below shows the mechanical ambient conditions in the form of sinusoidal
oscillations.
Table 10- 8
Frequency band
5 ≤ f ≤ 8.4 Hz
8.4 ≤ f ≤ 150 Hz
10 ≤ f ≤ 60 Hz
60 ≤ f ≤ 1000 Hz
Test of mechanical ambient conditions
The table below provides important information with respect to the type and scope of the test
of ambient mechanical conditions.
Table 10- 9 Test of mechanical ambient conditions
Condition tested Test Standard
Vibration Vibration test accord-
ing to IEC 60068-2-6
(sine)
Shock Shock, tested accord-
ing to IEC 60068-2-27
90
Mechanical ambient conditions
CPU 1515SP PC
3.5 mm amplitude
1 g constant acceleration
0.35 mm amplitude
1 g constant acceleration (with BusAdapter BA 2×RJ45)
•
2 g constant acceleration (with BusAdapter BA 2×FC)
•
Comment
Type of oscillation: Frequency sweeps with a rate of change of 1 oc-
tave/minute.
BA 2×RJ45
5 Hz ≤ f ≤ 8.4 Hz, 3.5 mm constant amplitude
•
8.4 Hz ≤ f ≤ 150 Hz, 1 g constant acceleration
•
BA 2×FC
10 Hz ≤ f ≤ 60 Hz, 0.35 mm constant amplitude
•
60 Hz ≤ f ≤ 1000 Hz, 2 g constant acceleration
•
Duration of vibration: 10 frequency sweeps per axis in each of 3 vertically
aligned axes
Type of shock: Half-sine
Shock intensity: 150 m/s
Direction of shock: 3 shocks in each direction (+/-) at each of 3 vertically
aligned axes
peak value, 11 ms duration
2
Manual, 12/2014, A5E32701806-AA
CPU 1515SP PC