Maintenance; Backing Up And Restoring Data - Siemens simatic ET 200SP User Manual

Maintenance

9.1

Backing up and restoring data

Introduction
The operating system and the Runtime software are located on the supplied Restore DVD.
You can use this to restore the original software of the CPU 1515SP PC.
You can also create your own image of your CFast card. This includes the operating system,
the Runtime software, and the complete project loaded from the TIA Portal.
Save your project to partition D: of the CFast card.
SIMATIC IPC Image & Partition Creator
To back up data in Windows Embedded Standard 7, we recommend the software tool
SIMATIC IPC Image & Partition Creator (V3.3 or later). It provides for easy backup and fast
restore of the contents of the CFAST card and of individual partitions (images).
Note
The SIMATIC Image & Partition Creator supports the X2 PN/IE (LAN) interface.
You can procure the SIMATIC IPC Image & Partition Creator:
● via the Siemens online ordering system (http://www.siemens.de/automation/mall).
● Pre-installed on the SIMATIC IPC Service USB flash drives.
For additional information, please refer to the corresponding product documentation.
SIMATIC IPC Service USB flash drive
You can use the SIMATIC IPC Service USB flash drives for data backup and restore.
You obtain these through the Siemens online ordering system
(http://www.siemens.de/automation/mall).
CPU 1515SP PC
Manual, 12/2014, A5E32701806-AA
9
73