Front Panel - Akai s2000 Owner's Manual

INTRODUCTION

FRONT PANEL

FLOPPY DISK DRIVE
AKAI
Professional
POWER
POWER SWITCH
POWER SWITCH
FLOPPY DISK DRIVE
MODE KEYS
PLAY KEY
DATA ENTRY
ANALOGUE INPUTS
PHONES
MAIN OUTPUT LEVEL
RECORD LEVEL
PAGE UP/DOWN KEYS
GROUP UP/DOWN KEYS
Page 6
PAGE/GROUP UP/DOWN KEYS
SOFT KEYS
S2000
MIDI DIGITAL STEREO SAMPLER
F1
SINGLE
EDIT
Applies power to the S2000.
Allows you to save and load data to or from a floppy disk. You
may also load new operating systems from the floppy disk
drive.
Selects the operating mode for the sampler.
Allows you to play a sound without the need for a MIDI
controller (i.e. keyboard) to be connected.
The inner wheel allows you to set data values and the outer
wheel allows you to select items for editing depending on the
selected mode.
These jack inputs allow stereo recording. When only the
L/MONO input is connected, mono recording is possible.
This stereo jack socket allows you to monitor the L/R (stereo)
output of the S2000 through stereo headphones. The level
is regulated using the MAIN OUTPUT LEVEL control (see
below).
The MAIN OUTPUT LEVEL control sets the main output level
of the L/R stereo outputs (this control does not affect the
level of the signal appearing at the optional individual outputs
or digital output).
Sets the record level for analogue inputs.
Allows you to step through the various pages or screens
available in the S2000.
Certain parameters are grouped together and these keys
allow you to skip intermediary pages allowing quick access to
logical groups of parameters. These are explained in detail
later in this manual.
DATA/SELECT WHEEL
LCD
PAGE GROUP
CURSOR F2
MULTI SAMPLE EFFECTS
GLOBAL SAVE LOAD PLAY
MODE KEYS
PLAY KEY
S2000 Operator's Manual - Version 1.30
MAIN OUTPUT LEVEL
RECORD LEVEL
DATA SELECT REC GAIN MAIN VOLUME
MIN MAX MIN
L/MONO
R PHONES
PHONES OUTPUT
ANALOGUE INPUTS
MAX