Forwarding & Filtering; Unicast Forwarding - D-Link des-3010f User Manual

Layer 2 managed 8/16/24-port 10/100mbps fast ethernet switch with optional slots
Hide thumbs Also See for des-3010f:
Table of Contents

Advertisement

DES-3010F/DES-3010FL/DES-3010G/DES-3018/DES-3026 Fast Ethernet Switch Manual
Forwarding & Filtering

Unicast Forwarding

Open the Forwarding & Filtering folder in the Administration menu and click on the Unicast Forwarding link. This will open
the Setup Static Unicast Forwarding Table, as shown below:
Figure 6- 53. Unicast Forwarding Table and Static Unicast Forwarding Table window
To add or edit an entry, define the following parameters and then click Add/Modify:
Parameter
VLAN ID (VID)
MAC Address
Port
Click Apply to implement the changes made. Current entries can be found in the Static Unicast Forwarding Table as shown in
the bottom half of the figure above. To delete an entry in the Static Unicast Forwarding Table, click the corresponding
the Delete heading.
Description
The VLAN ID number of the VLAN on which the above Unicast MAC address resides.
The MAC address to which packets will be statically forwarded. This must be a unicast
MAC address.
Allows the selection of the port number on which the MAC address entered above
resides.
67
under

Advertisement

Table of Contents
loading

This manual is also suitable for:

Des-3010flDes-3010gDes-3018Des-3026

Table of Contents