Initializing Ports For Mac Based 802.1X; Reauthenticate Port(S) For Port Based 802.1X - D-Link des-3010f User Manual

DES-3010F/DES-3010FL/DES-3010G/DES-3018/DES-3026 Fast Ethernet Switch Manual

Initializing Ports for MAC Based 802.1x

To initialize ports for the MAC side of 802.1x, the user must first enable 802.1x by MAC address in the Advanced Settings
window. Click Security > 802.1X > 802.1X Initialize Ports to view the following window:
To initialize ports, first choose the range of ports in the From and To field. Then the user must specify the MAC address to be
initialized by entering it into the MAC Address field and checking the corresponding check box. To begin the initialization, click
Apply.
NOTE: The user must first globally enable 802.1X in the DES-3018 Web
Management Tool window before reauthenticating ports. Information in the Initialize
Ports Table cannot be viewed before enabling 802.1X.
NOTE: The uplink module ports (DES-3010F/FL/G ports 9-10, DES-3018 ports 17-18,
DES-3026 ports 25-26) do not support the 802.1X function.

Reauthenticate Port(s) for Port Based 802.1x

This window allows you to reauthenticate a port or group of ports by choosing a port or group of ports by using the pull down
menus From and To and clicking Apply. The Reauthenticate Port Table displays the current status of the reauthenticated
port(s) once you have clicked Apply.
Click Security > 802.1X > Reauthenticate Port(s) to view the following window:
Figure 10- 20. Reauthenticate Port and Reauthenticate Port Table window
This window displays the following information:
Figure 10- 19. Initialize Ports (MAC based 802.1x)
130