Forwarding Filtering
Unicast Forwarding
Open the Forwarding Filtering folder in the Configuration menu and click on the Unicast Forwarding link. This will
open the Setup Static Unicast Forwarding Table, as shown below:
Figure 6- 28. Setup Static Unicast Forwarding Table and current Static Unicast Forwarding Table
To add or edit an entry, define the following parameters and then click Add/Modify:
Parameter
VLAN ID (VID)
MAC Address
Unit
Port
Click Apply to implement the changes made. To delete an entry in the Static Unicast Forwarding Table, click the
corresponding
under the Delete heading.
DXS-3350SR Gigabit Layer 3 Switch
Description
The VLAN ID number of the VLAN on which the above Unicast MAC address resides.
The MAC address associated with packets that are statically forwarded. Any packets
from this MAC address (that are not received on the selected port) are forwarded to the
selected port. This must be a unicast MAC address.
Select the unit in the stack containing the port to which packets associated with the
MAC address will be forwarded.
The port on the chosen Switch to which packets associated with the MAC address will
be forwarded.
72