Introduction; Switch Description; Features - D-Link des-3010f User Manual

DES-3010F/DES-3010FL/DES-3010G/DES-3018/DES-3026 Fast Ethernet Switch Manual

Introduction

Ethernet Technology

Switch Description

Features

Ports
Front-Panel Components
Side Panel Description
Rear Panel Description
Gigabit Combo Ports
Ethernet Technology
Fast Ethernet Technology
The following manual describes the installation, maintenance and configurations concerning members of the DES-3010F/DES-
3010FL/DES-3010G/DES-3018/DES-3026 Switch group. These switches are identical in configurations and very similar in basic
hardware and consequentially, most of the information in this manual will be universal to the total group of Switches.
Corresponding screen pictures of the web manager may be taken from any one of these switches but the configuration will be
identical, except for varying port counts. For the remainder of this document, we will refer primarily to the DES-3018 as the
switch in question for examples, configurations and explanations.
Switch Description
The DES-3010F/DES-3010FL/DES-3010G/DES-3018/DES-3026 is a high performance 8/16/24-port Fast Ethernet switch.
Comprising 10/100Mbps switched unshielded twisted-pair (UTP) and Auto MDI-X/MDI-II convertible ports, and each model
having its own uplink port capability, this Switch will be ideal for segmenting networks into smaller, sub-connected networks for
optimum throughput capability of the most demanding multimedia and imaging applications available on the network without
creating bottlenecks. These ports can also be used for connecting PCs, printers, servers, hubs, routers, switches and other
networking devices, each supporting up to 200 Mbps of throughput in full-duplex mode.
The open slots available on the DES-3018/DES-3026 models, the gigabit port on the DES-3010G and the fiber-optic port on the
DES-3010F and DES-3010FL can provide an uplink to a server or network backbone. The built-in console interface can be used
to configure the Switch's settings for priority queuing, VLANs, and port trunk groups, port monitoring, and port speed.
Features
IEEE 802.3z compliant
•
IEEE 802.3x Flow Control in full-duplex compliant
•
IEEE 802.3u compliant
•
IEEE 802.3ab compliant
•
IEEE 802.1p Priority Queues
•
IEEE 802.3ad Link Aggregation Control Protocol support.
•
IEEE 802.1x Port-based and MAC-based Access Control
•
IEEE 802.1Q VLAN
•
IEEE 802.1D Spanning Tree and IEEE 802.1W Rapid Spanning Tree
•
Single IP Management support
•
Simple Network Time Protocol support
•
System and Port Utilization support
•
System Log Support
•
Section 1
1