Static Vlan Entry - D-Link des-3010f User Manual
Layer 2 managed 8/16/24-port 10/100mbps fast ethernet switch with optional slots
Hide thumbs
Also See for des-3010f:
- Command line interface manual (231 pages) ,
- Manual (225 pages) ,
- Command line interface reference manual (175 pages)
Table of Contents
Advertisement
DES-3010F/DES-3010FL/DES-3010G/DES-3018/DES-3026 Fast Ethernet Switch Manual
Static VLAN Entry
In the L2 Features folder, open the VLAN folder and click the Static VLAN Entry link to open the following window:
Figure 7- 4. 802.1Q Static VLANs window
The 802.1Q Static VLANs menu lists all previously configured VLANs by VLAN ID and VLAN Name. To delete an existing
802.1Q VLAN, click the corresponding
button under the Delete heading.
To create a new 802.1Q VLAN, click the Add button in the 802.1Q Static VLANs menu. A new menu will appear, as shown
below, to configure the port settings and to assign a unique name and number to the new VLAN. See the table below for a
description of the parameters in the new menu.
Figure 7- 5. 802.1Q Static VLANs - Add
To return to the Current 802.1Q Static VLANs Entries window, click the
Show All Static VLAN Entries
link. To change an
existing 802.1Q VLAN entry, click the Modify button of the corresponding entry you wish to modify. A new menu will appear to
configure the port settings and to assign a unique name and number to the new VLAN. See the table below for a description of the
parameters in the new menu.
77
Advertisement
Table of Contents
