Changing The Page Layout - Raymarine ST70+ Operating Manual

16
Card
Applicability:
Introduction
You can change the layout of a page by completely rebuilding it, as described below.
Rebuilding pages
1. Starting
With any operational page displayed, press
play the Main Menu, then scroll to the Page Layout
option.
OK
Press to display the Page Layout menu.
2. Select the page you want to change.
Scroll to select the page you want to change.
OK
Press to display the Setup options menu for the
selected page.
3. Select Rebuild
Scroll to Rebuild.
OK
Press to display the Layout menu for the selected
page.
4. Select page layout
Scroll to the page layout you want. The following layouts
are available:
When you have selected the layout you want, press
go to the frame select box.
5. Select the frame you want to change
Use the Rotary Control and/or
appropriate, to move the highlight to the frame you want to
change.
OK
Press to go to the data group select menu.

Changing the page layout

The procedures on this card apply to all configurations of ST70+ Instruments.
They are NOT relevant to ST70+ Pilot Controllers.
PAGE UP/PAGE DN
MENU
, to dis-
Page Layout
Select the page you wish to
i
configure.
Page 1 Setup
Page 1 Layout
OK
Select the layout you wish to
to
i
use.
Page 6
as
Xxx
Xxx
Depth.
i
Select SAVE icon and press OK to save changes.
CANCEL exits without saving.
ST70+ Instrument
Page 6 On
Press OK to select
Rebuild
Press OK to select
Layout 1
Press OK to select
Xxx Xxx
xx xx xx
Xxx Xxx
xx xx xx
Press OK to select
continued ...