Raymarine ST70+ Operating Manual page 34

ST70+ Instrument
Changing the page layout
6. Select the required data group.
Scroll to the data group that contains the data you want
(Depth shown here).
If you don't know which group you need, select All.
Note:
ST70+ supports a wide range of data. Refer to Card 21 for a full data list.
OK
Press to go to the data select menu.
7. Choose the data you want.
Scroll to the data you want, in the style you want it dis-
played.
The styles available depend on the data type, but in many
cases, data is available in all the following formats:
• Analog dial.
• Numeric value.
• Graph.
OK
Press to select the data and return to the frame select box.
8. Set up other frames
Repeat step 5 to step 7, to set up the remaining frames on the selected page.
Returning to operating page
When you have completed the setup for the selected page,
ensure the frame select box is displayed, then use the
Rotary Control and/or
to move the highlight to the Save & Exit icon. Then press
either:
OK
• to return to your operational page, with the changes
applied, or
CANCEL
• to return to the setup options menu, without
applying the changes. To return to your operational
page from here, press
PAGE UP/PAGE DN
as appropriate,
CANCEL
three times.
Card
Page 6 Frame A
Depth
Select the data items group.
i
Press OK to select
Page 6 Frame A
//// //// //// ////
0 0. 0. 0
00 00 00 00
//// //// //// ////
Minimum depth
Select the new data item.
i
Press OK to accept
Page 6
Xxx Xxx Xxx
xx xx xx
Xxx Xxx Xxx
xx xx xx
Press OK to save changes and exit.
i
CANCEL exits without saving.
Press OK to accept
Save & exit
16
continued
//// ////
0 0.
00 00
//// ////