17
Card
Applicability:
Introduction
This card tells you how to set and use the ST70+ alarm clock.
Initial setup
1. Select Display Settings
MENU
Press
to display the Main Menu then scroll to Dis-
play Settings.
OK
Press
to display the Display Settings menu.
2. Select Timers
At the Display Settings menu, scroll to the Timers option,
OK
then press
. to display the Timers menu.
Setting alarm clock
1. Select Alarm Clock function
With the Timers menu displayed, scroll to Alarm Clock
OK
then press
to display the Alarm Clock setup page.
2. Set alarm clock status
PAGE UP
Press
to select the upper adjust box.
Use the Rotary Control to set the alarm clock either On or
Off, as required.
PAGE DN
Press
to select the lower adjust box.
3. Adjust alarm time
With the lower adjust box selected:
1. Use the rotary to select the hours box.
OK
2. Press
.
3. Use the Rotary Control to set the hour value for the alarm
time.
OK
4. Press
5. Use the Rotary Control to select the minutes box.
OK
6. Press
.
7. Use the Rotary Control to set the minute value for the
alarm time.
OK
8. Press
.
The procedures on this card apply to all configurations of ST70+ Instruments.
They are NOT relevant to ST70+ Pilot Controllers.
ST70+ Instrument
Using alarm clock
Display Settings
Timers
Alarm clock and race timers.
i
Press OK to select
Timers
Alarm Clock
Press OK to select
Alarm Clock
Press CANCEL to exit without
i
saving.
Press OK to accept
Alarm Clock
Press CANCEL to exit without
i
saving.
Press OK to accept
10
0
On
:
07
25
Hrs
On
07
:
25
Hrs
continued ...