It includes information to help you: ST70 Pilot Controller — Commissioning for SPX 81287 autopilot systems • understand some of the basic features and controls of the ST70 Contains system commissioning, maintenance and Instrument, troubleshooting. • access the setup menus required for configuration of the system ST70 Pilot Controller —...
POWER button — Switch power on and off, and access screen • Press and hold for fine adjustment. brightness control. 3. Press ENTER to accept the new brightness setting. MENU button — Access to user preferences and system configuration menus. ST70 Instrument Quick reference...
Choosing the screen colors You can choose from a range of screen color palettes, for example The ST70 presents instrument data on a series of pages. You have to suit changes in the available light during the evening. up to 8 pages available, each of which can be set up with different 1.
• Exit setup without making any changes. BTW and DTW require data from other sources such as a GPS • Return to previous setup menu item. and multifunction display. If these are not available then only the elapsed time is displayed. ST70 Instrument Quick reference...
1. Press MENU. 2. Select Advanced options > Transducer setup. The ST70 will search for transducers connected to the system and display the results of the search as a list. 3. Press ENTER to proceed and setup the parameters for the Page settings Customize the page layouts and information displayed.
Page 8
Repeat this for each calibration speed valid for your boat. D11890-1 Speeds which fall outside your boat’s capability need not be 3. Press ENTER to display the Speed Calibration menu. This gives calibrated. the following options: ST70 Instrument Quick reference...
Page 9
• Add point — To add a speed value to the list of calibration speeds. • Delete point — To remove a speed value from the list of calibration speeds. • Factory Reset — To reset the calibration to its factory default. 4.