Setting The Screen Colors - Raymarine ST70+ Operating Manual

5
Applicability: The procedures on this card apply to all configurations of ST70+ Instruments and Pilot Controllers.
Use these instructions to set the screen colors for optimum viewing (daytime and nighttime).
There are four different color settings plus an inverse video option.
Choosing colors
1. Starting
With any operational page displayed, press
the Display Settings option.
OK
Press to show the Display Settings menu.
2. Select option
At the Display Settings page, scroll to the Colors option.
OK
Press to display the 1. Colors - select zone screen.
3. Select displays
Scroll to select the displays on which you want to set the
screen colors:
• This group - affects all displays in the same group as
the selected display (default setting).
• All displays - affects all displays in the system.
• This display - affects just this display.
OK
Press to display the 2. Colors - select value screen.
4. Select color
Scroll to select the screen colors you want. You can
choose from.
• Mode 1
• Mode 2
• Mode 3
• Red/black (recommended for night time viewing)
• Inverse
OK
Press to save the setting and return to the Display
Settings menu.
Returning to operating page
To return to normal operation from the Display Settings menu, press
ST70+ general information

Setting the screen colors

MENU
, to display the Main Menu, then scroll to
1. Colors - select zone
i
1. Colors - select value
i
This group
Select the zone for color
i
changes, using < & >.
Press OK to continue
Mode 1
Select colors using < & >.
Press OK to accept
CANCEL
twice.