Table of Contents
Advertisement
To access the AUTOCLEAN TIME-OUT:
- press
- press
The following screen will appear:
THRESHOLD is used regardless of the inserter mode (connected
or not connected). This threshold is set to 45 minutes by default.
It determines the timing between two headset cleaning. When this
threshold is reached, headset cleaning is launched.
This TIME OUT period is used in the inserter mode "Not connected".
It is set to 600 seconds by default. This timeout period is used to
launch a headset cleaning when the mailing machine does not
detect a document for the amount of time specified, and if the
number of documents printed is higher than 70% of the
THRESHOLD value.
The WARNING THRESHOLD is used to activate the flashing
yellow light on the Status Light Tower (page 41) prior to
commencing the headset cleaning process.
4131934X/C
17/09/2008
Timeout AUTO CLEAN
from the main screen, and select HEADSET
CLEANING
to confirm;
OK
HEADSET CLEANING
THRESHOLD (SEC.)
TIME OUT (SEC.)
WARNING THRESH. (SEC.)
HOME
HOME
LOGOUT
Machine configuration printing (Supervisor mode)
DISPL...
SUP
-
+
2700
0015
-
30
0015
+
120
0015
-
+
ORIG0060-65
OK
65
Advertisement
Table of Contents
